How do you remove and install the cooling fan assembly?

To remove the front bumper cover and hood latch, detach any electrical connectors from the bumper support and remove the front bumper impact absorber. Then, remove the two radiator upper mounting brackets and tilt the radiator and condenser forward for additional access. Disconnect the Radiator fan electrical connectors and remove the two fan shroud-to-radiator bolts and fasteners. Lift the radiator fan assembly from the lower radiator mounts and out of the engine compartment. To detach the fan motor from the shroud, remove the screws. To detach the fan blade from the motor, remove the motor shaft clip or bolt, depending on the design. For installation, simply reverse the steps of removal. Finally, run the engine to normal operating temperature and operate the air conditioning to ensure the radiator fans operate properly.

Genuine Chevrolet Traverse Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Radiator fans found

View related parts
Chevrolet Traverse Fan Assembly, Engine Cooler
Part Number: 23434158
$369.24 MSRP: $775.71
You Save: $406.47 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Eng Clr; Fan Assembly, Fan Shroud
- Replaces: 25927026, 15226663, 20972760
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Fan Assembly, Engine Cooler
Part Number: 84199037
$302.70 MSRP: $571.14
You Save: $268.44 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Eng Clr; Fan Assembly, Fan Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
View related parts
Chevrolet Traverse Fan Assembly, Eng Clr
Part Number: 84725045
$268.45 MSRP: $563.98
You Save: $295.53 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84199039
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Fan Assembly, Eng Clr
Part Number: 84725046
$251.38 MSRP: $528.13
You Save: $276.75 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaces: 84199038
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Fan Assembly, Eng Clr
Part Number: 84861223
$246.54 MSRP: $444.22
You Save: $197.68 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaced by: 85151154
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Fan Assembly, Eng Clr
Part Number: 84861224
$287.70 MSRP: $518.38
You Save: $230.68 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly, Fan Module
- Replaced by: 85151156
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Chevrolet Traverse Radiator fan Parts Questions & Experts Answers

Fan Assembly, Engine Cooler
23434158
Q: How do you remove and install the cooling fan assembly?
A: To remove the front bumper cover and hood latch, detach any electrical connectors from the bumper support and remove the front bumper impact absorber. Then, remove the two Radiator upper mounting brackets and tilt the radiator and condenser forward for additional access. Disconnect the Radiator fan electrical connectors and remove the two fan shroud-to-radiator bolts and fasteners. Lift the radiator fan assembly from the lower radiator mounts and out of the engine compartment. To detach the fan motor from the shroud, remove the screws. To detach the fan blade from the motor, remove the motor shaft clip or bolt, depending on the design. For installation, simply reverse the steps of removal. Finally, run the engine to normal operating temperature and operate the air conditioning to ensure the radiator fans operate properly.