How do you remove the water pump for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?

To remove the water pump, start by disconnecting the cable from the negative battery terminal and draining the cooling system. Remove the drivebelt, right-side engine strut mount, and mount bracket. Hold the water pump pulley with a strap wrench or pin spanner and remove the pulley mounting bolts and pulley. Then, remove the water pump mounting bolts and carefully remove the pump from the engine. Clean the mating surface of the engine and the water pump if it will be reinstalled. To install the new water pump, compare it with the old one to ensure they are identical. Place the gasket and water pump into position and install the new mounting bolts. Tighten the water pump mounting bolts in a criss-cross pattern to the specified torque. Finally, tighten the water pump pulley bolts, refill the cooling system with the proper antifreeze concentration, and start the engine to check for leaks while it reaches normal operating temperature.

Genuine Chevrolet Traverse Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Water Pumps found

View related parts
Chevrolet Traverse Pump Assembly, Wat
Part Number: 25201450
$220.44 MSRP: $437.39
You Save: $216.95 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Water Pump, Water Pump Assembly
- Replaces: 12657198, 12663910, 12653661, 12690252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
View related parts
Chevrolet Traverse Auxiliary Water Pump Assembly
Part Number: 13592751
$78.72 MSRP: $141.18
You Save: $62.46 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Auxiliary Water; Auxiliary Pump, Water Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Traverse | LT EXTENDED 4 DOOR SUV | 4 Cyl 2.0L
View related parts
Chevrolet Traverse Pump Assembly, Aux Wat
Part Number: 13546434
$62.41 MSRP: $111.94
You Save: $49.53 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Auxiliary Pump
- Replaced by: 13551861
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Traverse | 1LT/2LT EXTENDED 4 DOOR SUV, 1LZ/2LZ EXTENDED 4 DOOR SUV, LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Chevrolet Traverse PUMP ASM-CHRG AIR CLR COOL
Part Number: 13547413
$113.52 MSRP: $179.39
You Save: $65.87 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Water Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2024 Chevrolet Traverse | LS 4 DOOR APV EXTENDED , LT 4 DOOR APV EXTENDED , PREM 4 DOOR APV EXTENDED, Z71 4 DOOR APV EXTENDED | 4 Cyl 2.5L
View related parts
Chevrolet Traverse Pump Kit, Wat
Part Number: 12709178
$196.97 MSRP: $354.90
You Save: $157.93 (45%)
Ships in 1-3 Business Days
Product Specifications
- Other Name: Water Pump, Water Pump Assembly
- Replaces: 12645176, 12637479, 12618472, 12657499
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV, SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L

Chevrolet Traverse Water Pump

The Water Pump in Chevrolet Traverse automobile is a critical part which pumps the coolant from the radiator to the engine, conveying the heat produced through the process of combustion. The crankshaft of most models drives a belt, thus activating the aluminum casting with a rotating shaft. Signs that may dictate that your vehicle has a faulty Water Pump include; leakage of the coolant, presence of noise due to worn bearings, and overheating of the engine. There are Performance Water Pumps developed for the high-performance engines which provide more coolant flow and less power consumption. Electric Water Pumps are also an available option, which has advantages such as separate coolants' circulation from the rpm, and post-engine shut down cooling. There are various kinds of the Water Pump, which includes modified Original Equipment cast iron one, and other fully customized aluminum unit, all of which generally contribute to the enhanced engine cooling operation.

Each OEM Chevrolet Traverse Water Pump we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Traverse Water Pump Parts Questions & Experts Answers

Engine Coolant Pump Kit
12657499
Q: How do you remove the water pump for Buick Enclave,Chevrolet Traverse,GMC Acadia and Saturn Outlook?
A: To remove the water pump, start by disconnecting the cable from the negative battery terminal and draining the cooling system. Remove the drivebelt, right-side engine strut mount, and mount bracket. Hold the water pump pulley with a strap wrench or pin spanner and remove the pulley mounting bolts and pulley. Then, remove the water pump mounting bolts and carefully remove the pump from the engine. Clean the mating surface of the engine and the water pump if it will be reinstalled. To install the new water pump, compare it with the old one to ensure they are identical. Place the gasket and water pump into position and install the new mounting bolts. Tighten the water pump mounting bolts in a criss-cross pattern to the specified torque. Finally, tighten the water pump pulley bolts, refill the cooling system with the proper antifreeze concentration, and start the engine to check for leaks while it reaches normal operating temperature.