How can headlights and fog lights be adjusted for proper alignment and optimal visibility for Buick Enclave,Chevrolet Traverse and GMC Acadia?

Headlights and fog lights can be adjusted to ensure proper alignment and optimal visibility. For composite headlights, there are adjustment screws that control the up-and-down movement, but left-and-right movement is not adjustable. To adjust the headlights, a blank wall 25 feet in front of the vehicle and a level floor are needed. Position masking tape on the wall in reference to the vehicle centerline and the centerlines of both headlights. Measure the height of the headlight reference marks from the ground and position a horizontal tape line on the wall at the same height. With the vehicle sitting level, the gas tank half-full, and no heavy load, turn on the low beams and adjust the adjusting screw to position the high-intensity zone eight inches below the horizontal line. To ensure proper adjustment, it is recommended to have the headlights adjusted professionally. Similarly, fog lights can also be adjusted like headlights. Position tape on a wall 25 feet in front of the vehicle and tape a horizontal line representing the height of the fog light centers, as well as another line four inches below. Remove the fasteners from the front portion of the inner fender splash shield to access the adjustment screws for the fog lights. Adjust the pattern on the wall so that the top of the fog light beam meets the lower line.

Genuine Chevrolet Traverse Fog Light

Fog Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Fog Lights found

View related parts
Chevrolet Traverse Lamp Assembly, Front Fog
Part Number: 42548992
$61.77 MSRP: $92.35
You Save: $30.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fog Lamp Assembly
- Position: Front
- Replaces: 20780914, 95393617
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV, LT EXTENDED 4 DOOR SUV, LTZ EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse Lamp Assembly, Front Fog
Part Number: 10335108
$90.94 MSRP: $143.01
You Save: $52.07 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: LAMP, Capsule/Headlamp/Fog Lamp; Fog Lamp, Fog Lamp Assembly, Fog Lamp Bulb
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Traverse | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Chevrolet Traverse Front Foglamps
Part Number: 84339053
$243.38 MSRP: $295.00
You Save: $51.62 (18%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Pkg, Fog Lp Acnt *Chrome)(Instm
- Position: Front
- Replaced by: 84739006
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse Front Foglamp Kit in Chrome
Part Number: 84739006
$243.38 MSRP: $295.00
You Save: $51.62 (18%)
Product Specifications
- Other Name: Lamp Pkg, Fog Lp Acnt *Chrome)(Instm
- Position: Front
- Replaces: 84339053
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Chevrolet Traverse Front Foglamp Kit in Black with Chrome insert
Part Number: 84739007
$243.38 MSRP: $295.00
You Save: $51.62 (18%)
Product Specifications
- Other Name: Lamp Pkg, Fog Lp Acnt *Chrome)(Instm
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020 Chevrolet Traverse | LS EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Chevrolet Traverse Fog Light

Chevrolet Traverse Fog Lights are extremely crucial in cases where visibility on the road is low such as in fogs, rainy or dusty weather. The lights produce a bar-shaped beam output design that can effectively cut through a nasty bout of weather, at the same time avoiding glial to oncoming motorists. Each of the Traverse vehicles does not necessarily come with fog lights as a standard feature; however, bumpers with LED lights in different colors, projector lights, halo ring light can be obtained. There is certain light clan for front fog lamps which helps in better road lighting and reduces glare-back There are rear fog lamps which are compulsory in certain country to have enhanced visibility from rear in case of poor visibility. The controversy of having a single or dual rear fog lamps is still an issue which regulations various to control the distance between them and the brake lamps.

Each OEM Chevrolet Traverse Fog Light we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Traverse Fog Light Parts Questions & Experts Answers

Lamp Assembly, Front Fog
10335108
Q: How can headlights and fog lights be adjusted for proper alignment and optimal visibility for Buick Enclave,Chevrolet Traverse and GMC Acadia?
A: Headlights and fog lights can be adjusted to ensure proper alignment and optimal visibility. For composite headlights, there are adjustment screws that control the up-and-down movement, but left-and-right movement is not adjustable. To adjust the headlights, a blank wall 25 feet in front of the vehicle and a level floor are needed. Position masking tape on the wall in reference to the vehicle centerline and the centerlines of both headlights. Measure the height of the headlight reference marks from the ground and position a horizontal tape line on the wall at the same height. With the vehicle sitting level, the gas tank half-full, and no heavy load, turn on the low beams and adjust the adjusting screw to position the high-intensity zone eight inches below the horizontal line. To ensure proper adjustment, it is recommended to have the headlights adjusted professionally. Similarly, fog lights can also be adjusted like headlights. Position tape on a wall 25 feet in front of the vehicle and tape a horizontal line representing the height of the fog light centers, as well as another line four inches below. Remove the fasteners from the front portion of the inner fender splash shield to access the adjustment screws for the fog lights. Adjust the pattern on the wall so that the top of the fog light beam meets the lower line.