My Garage
My Account
Cart
Genuine Chevrolet Trailblazer Harmonic Balancer
Engine Harmonic Balancer- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Harmonic Balancers found
Chevrolet Trailblazer Balancer Asm,Crankshaft
Part Number: 19300488$106.50 MSRP: $185.36You Save: $78.86 (43%)Ships in 1-2 Business Days
Chevrolet Trailblazer Balancer Assembly, Cr/Shf
Part Number: 55512745$41.22 MSRP: $64.85You Save: $23.63 (37%)Ships in 1-3 Business Days
Chevrolet Trailblazer BALANCER ASM-CR/SHF
Part Number: 25203989$43.09 MSRP: $67.80You Save: $24.71 (37%)Ships in 1-2 Business Days
Chevrolet Trailblazer BALANCER ASM-CR/SHF
Part Number: 12707253$55.29 MSRP: $86.99You Save: $31.70 (37%)Ships in 1-3 Business Days
Chevrolet Trailblazer Balancer Assembly, Crankshaft
Part Number: 12578069$117.89 MSRP: $186.33You Save: $68.44 (37%)
Chevrolet Trailblazer Harmonic Balancer
In Chevrolet Trailblazer cars, the Harmonic Balancer is vital as it holds the engine and absorbs vibrations resulting from the combustion. This one is called a vibration damper and consists of a metal hub connected to the crankshaft, a thick metal inertia ring and a rubber ring which can flex and thus counteract twisting motion. Extended time under heat and if fluids are applied, it wears off the rubber part and may cause over vibrations and may lead to crankshafte. An extended range of Harmonic Balancers may be installed on Chevrolet Trailblazer models: a standard version of the original equipment and high-performance modifications. While standard balancers are intended for factory engine specifications, the performance harmonic balancers are made to endure the vibrations generated from high modified engines in all RPM ranges. Such options include the standard, viscous fluid, and multi-piece kinematics that have been tried and proved for safety and efficiency in performance.
Each OEM Chevrolet Trailblazer Harmonic Balancer we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Trailblazer Harmonic Balancer Parts Questions & Experts Answers
- Q: How to install a crankshaft balancer in V8 engine on Chevrolet Trailblazer?A: This procedure must be done with the aid of a balancer installation tool from the tool maker and a new harmonic balancer bolt. First of all, take out the cable in question starting with the negative terminal of the battery. Lift the front of the vehicle and put it on jackstands and then engage the parking brake. I want to take out the drivebelt and the cooling fan. If fitted, work under the vehicle and unbolt the stone shield below the engine. A strap wrench is used round the harmonic balancer pulley to grip it and stead it while the harmonic balancer pulley center bolt is loosened by a breaker bar socket and if no strap wrench is available a chain-type wrench can be used with a section of old drivebelt or rag wrapped round the harmonic balancer. Remove the harmonic balancer from the crankshaft using a three jaw puller without having the region of the jaws coming into contact with the outer ring of the harmonic balancer but the center hub. Place a long Allen-head bolt into the crankshaft nose where the tapered tip of the puller has to go in since the threads of the crankshaft could be damaged easily. Fit the crankshaft pulley/harmonic balancer to the crankshaft so that the slot in the hub fits round the Woodruff key fitted to the end of the crankshaft. Crank the new harmonic balancer into place using harmonic balancer installation tool 269-001, 269-002 TORX pressed onto the flange of the crankshaft. Replace the old harmonic balancer bolt and tighten the new nut to torque of 240 ft-lbs; this is followed by measuring the distance of the harmonic balancer hub to the crank snout, the harmonic balancer hub should by equally protrude 3/32 to 11/64 -inch beyond the crankshaft snout. If it measures wrong, than place back the harmonic balancer installation tool and press on the harmonic balancer until it measures as it should. Last, but not least, fit a new harmonic balancer bolt and go on turning it up to the certain value of the torque and the certain angle, Besides, don't forget to perform the rest of the installation procedures in the reverse order.
