Genuine Chevrolet Trailblazer Fan Shroud

Radiator Fan Shroud
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Fan Shrouds found

  • Chevrolet Trailblazer Fan Shroud - 15204231
    View related parts

    Chevrolet Trailblazer Shroud, Engine Coolant Fan

    Part Number: 15204231
    $121.03 MSRP: $191.29
    You Save: $70.26 (37%)
    ADD TO CART
    Product Specifications
    • Other Name: SHROUD, Radiator Fan Shroud; Fan Shroud, Shroud
    • Replaces: 15760073
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2003-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 8 Cyl 5.3L, 8 Cyl 6.0L
  • Chevrolet Trailblazer Fan Shroud - 15170459
    View related parts

    Chevrolet Trailblazer Shroud,Engine Coolant Fan

    Part Number: 15170459
    $62.01 MSRP: $92.68
    You Save: $30.67 (34%)
    Ships in 1-3 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: SHROUD, Radiator Fan Shroud; Fan Shroud, Shroud
    • Replaces: 15072396
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2002-2009 Chevrolet Trailblazer | 4 DOOR, 4 DOOR EXT | 6 Cyl 4.2L

Chevrolet Trailblazer Fan Shroud Parts Questions & Experts Answers

  • Q: How do I remove the Fan Clutch,Fan Shroud and Radiator fan?
    A: To remove the intake air baffle, start by removing the bolts and push pins that attach it to the Radiator support. Disconnect the transmission cooler lines at the engine bracket and fan shroud, and also disconnect the electro-viscous clutch electrical connector from the shroud. Remove the upper radiator hose from the radiator, being prepared for coolant spillage. Use a large wrench to remove the fan clutch retaining nut and detach the fan clutch assembly from the engine. If the water pump pulley slips on the belt, remove the drivebelts and use a strap wrench to hold the pulley. Unclip the shroud from the radiator side panels and tilt the condenser and radiator forward, with the help of someone if needed. Lift the radiator fan and shroud as one unit, while holding the condenser and radiator in the forward position. If necessary, unbolt the fan from the clutch. When installing, tighten the fan hub nut to the appropriate torque specifications. Finally, check the coolant and add as necessary to bring it to the appropriate level.

Related Chevrolet Trailblazer Parts