Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1995 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
| Page 1 of 2 |Next >
1-20 of 25 Results
Chevrolet Tahoe Oxygen Sensor
Chevrolet Tahoe's Oxygen Sensor is a vital component of the engine that collaborates with the engine control unit to supervise the emissions of fossil fuel and the efficiency of completion. In the device, the sensor measures the amount of the oxygen in exhaust fumes to guarantee the optimal air/fuel mixture decreasing toxic emissions. Being an integral part of the vehicle, this emission control equipment is very crucial in the performance of the vehicle as well as environmental conservation. To achieve these goals, higher advisory temperatures and various types of sensors including zirconia and titania are used, while the sensors being developed in the newer heated designs give a faster response rate in comparison to the older models. Hence, proper check up and performance monitoring of the oxygen sensor is crucial to reducing enhance emission and fuel burn.
Each OEM Chevrolet Tahoe Oxygen Sensor we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Tahoe Oxygen Sensor Parts Questions & Experts Answers
Q: What is an oxygen sensor and how is it used in Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL's engine management system?
A: An oxygen sensor is a galvanic battery that produces a small voltage output in response to the amount of oxygen in the exhaust gases. This voltage signal is crucial for the feedback loop between the oxygen sensor and the Powertrain Control Module (PCM) to maintain the perfect air/fuel ratio of 14.7:1 that the catalyst needs for optimal operation. All vehicles covered have On-Board Diagnostics II (OBD-11) engine management systems, which means they have the ability to monitor the performance of the Catalytic Converter. All models covered by this manual have four heated oxygen sensors: one upstream sensor per cylinder bank and one downstream sensor per cylinder bank. Special care must be taken whenever a sensor is serviced, as they are extremely delicate and cannot be dropped or handled roughly. The upstream and downstream oxygen sensors are heated to speed up the warm-up time during which the sensors are unable to produce an accurate voltage signal. The circuit for each oxygen sensor heater is controlled by the PCM. To remove the upstream or downstream oxygen sensor, the vehicle must be raised and securely placed on jackstands. The sensor electrical lead must be traced to the connector and disconnected before unscrewing the sensor with an oxygen sensor socket. If the sensor is difficult to loosen, penetrating oil can be sprayed onto the sensor threads and allowed to soak in for a while. When installing the old sensor, anti-seize compound should be applied to the threads to facilitate future removal. If installing a new oxygen sensor, it's not necessary to apply anti-seize compound to the threads as they already have anti-seize compounds on them. The installation process is the reverse of removal, and the sensor must be tightened to the torque specifications.