How do you remove Canister Purge Valves and Vapor Canister on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?

To remove the EVAP canister purge solenoid on a V6 model, start by removing the air intake duct and disconnecting the electrical connector and EVAP purge line quick-connect fitting from the solenoid. Then, remove the mounting nut and the solenoid itself. For a V8 model, follow the same steps but also cap both EVAP purge lines before disconnecting the inlet purge line quick-connect fitting. To remove the EVAP canister vent solenoid, disconnect the electrical connector and quick-connect fittings from the solenoid and remove it from its mounting bracket. To remove the EVAP canister, label and disconnect all EVAP hoses connected to it, remove the mounting nut, and remove the canister from its bracket. Finally, to remove the fuel tank pressure sensor, remove the fuel tank and the sensor from the fuel pump/fuel level sending unit mounting flange. Installation for all components is the reverse of removal.

Genuine Chevrolet Tahoe Vapor Canister

Fuel Vapor Canister

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Vapor Canisters found

View related parts
Chevrolet Tahoe Vent Assembly, Evap Emission Canister
Part Number: 23481275
$51.24 MSRP: $106.40
You Save: $55.16 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: VENT, Evaporation Emission System(Fuel Tank End)
- Replaces: 15286109, 15286148, 15893884, 15286149, 15844700, 20995471, 25962085, 25962086, 15286150, 20995472, 25887005, 15844699, 25932566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2016 Chevrolet Tahoe | 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
Chevrolet Tahoe Canister,Evap Emission
Part Number: 15733604
$157.90 MSRP: $327.86
You Save: $169.96 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Canister,Evap Emission
Part Number: 15109431
$157.90 MSRP: $327.86
You Save: $169.96 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2016 Chevrolet Tahoe | 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Tahoe Canister Assembly, Evap Emission
Part Number: 84106550
$149.76 MSRP: $310.96
You Save: $161.20 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 Chevrolet Tahoe | 1500 4 DOOR UTILITY | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Canister,Evap Emission
Part Number: 15746226
$170.34 MSRP: $353.70
You Save: $183.36 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 5.3L Flex
View related parts
Chevrolet Tahoe Canister Assembly, Evap Emission
Part Number: 22945639
$154.75 MSRP: $278.82
You Save: $124.07 (45%)
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 15286158
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
Chevrolet Tahoe Canister Asm,Evap Emission
Part Number: 17113330
$159.63 MSRP: $287.62
You Save: $127.99 (45%)
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Replaces: 17113310
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Tahoe | CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Canister Assembly, Fuel Vapor
Part Number: 17087115
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L
View related parts
Chevrolet Tahoe CANISTER ASM-EVAP EMIS
Part Number: 85107747
$147.25 MSRP: $265.32
You Save: $118.07 (45%)
Product Specifications
- Other Name: Vapor Canister
- Replaces: 84050713
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 5.3L, 8 Cyl 6.2L
View related parts
Chevrolet Tahoe Canister Kit,Evap Emission
Part Number: 17113540
Product Specifications
- Other Name: CANISTER KIT, Fuel Tank Evaporator/Purge Control
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Tahoe | 4 DOOR 1/2 TON | 8 Cyl 4.8L, 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 5.7L
View related parts
Chevrolet Tahoe Canister Assembly, Evap Emission
Part Number: 17096129
Product Specifications
- Other Name: CANISTER, Fuel Tank Evaporator/Purge Control; Vapor Canister
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997 Chevrolet Tahoe | CLASSIC 2 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON | 8 Cyl 5.7L

Chevrolet Tahoe Vapor Canister

The Vapor Canister is located in Chevrolet Tahoe automobiles and is part of the evaporative emission control (EVAP) system with other control devises that minimizes the automobile's effect on the environment. While engines that burn exhaust gases with a catalyst, the Vapor Canister inhibits fuel vapour to be released into the atmosphere instead it holds and supplies an atomized version of the fuel into the cylinders to be burnt. Consequently, a faulty Vapor Canister damages ecological friendliness of the vehicle as well as influences fuel consumption and safety by impairing the fuel tank ventilation. Consequently, damaged components must be replaced as soon as possible to avoid affecting the performance level.

Each OEM Chevrolet Tahoe Vapor Canister we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Tahoe Vapor Canister Parts Questions & Experts Answers

Canister,Evap Emission
15109431
Q: How do you remove Canister Purge Valves and Vapor Canister on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?
A: To remove the EVAP canister purge solenoid on a V6 model, start by removing the air intake duct and disconnecting the electrical connector and EVAP purge line quick-connect fitting from the solenoid. Then, remove the mounting nut and the solenoid itself. For a V8 model, follow the same steps but also cap both EVAP purge lines before disconnecting the inlet purge line quick-connect fitting. To remove the EVAP canister vent solenoid, disconnect the electrical connector and quick-connect fittings from the solenoid and remove it from its mounting bracket. To remove the EVAP canister, label and disconnect all EVAP hoses connected to it, remove the mounting nut, and remove the canister from its bracket. Finally, to remove the fuel tank pressure sensor, remove the fuel tank and the sensor from the fuel pump/fuel level sending unit mounting flange. Installation for all components is the reverse of removal.