The Fan Clutch in Chevrolet S10 includes a significant part that controls the speed of the cooling fan to control the heat level of the automobile's engine. The function of this thermostatic device is to allow the fan to freewheel at low temperatures, offloading the engine quickly to warm up. Suspended on the water pump pulley to rotate with the crankshaft, the Fan Clutch works when the engine has been running for some time, thereby, drawing air over the radiator to cool the coolant. Fan clutch type may also vary in Chevrolet S10 depending on the orientation of the engine where the visited assembly may use the viscous or electronically controlled clutch. They provide finer tuning in regard to the cooling of the engines which will in turn improve the performance and efficiency of the automobiles.
Each OEM Chevrolet S10 Fan Clutch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet S10 Fan Clutch Parts Questions & Experts Answers
Q: How do you remove the fan and clutch assembly on Chevrolet Blazer,S10,GMC Jimmy and Sonoma?
A: Disconnect the battery cable from the negative battery terminal. Then, take off the upper air intake duct, remove the upper fan shroud screws and take off the upper fan shroud. Next, remove the nuts holding the radiator fan/clutch assembly to the studs on the water pump. Hold the water pump pulley stationary and loosen the large nut retaining the radiator fan/clutch assembly to the water pump hub. Remove the fan and clutch. Off the vehicle, separate the fan from the clutch. Installation is the reverse of removal.