My Garage
My Account
Cart
Genuine Chevrolet Nova Fuel Tank
Gas Tank- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
1 Fuel Tank found
Chevrolet Nova Fuel Tank
The Fuel Tank of Chevrolet Nova vehicles is another estate of the automotive that functions as fuel supply tank everything the electric fuel pump as well as the fuel gauge sender. It is also used on the Evaporative Emission Control System (EVAP) to shut out vapors from escaping out from the fuel tank. Chevrolet Nova Fuel Tanks are fabricated using metal or plastic material, metal tanks corrode from rust and plastic tanks brittle due to extreme heat and cold and vibration. Race versions of the Nova might have fuel cells which are resistant to being punctured and thus they do not spill gas in cases of an accident. For some models there are high-capacity fuel tanks from military-grade polymer providing increased driving range and immunity to corrosion.
Each OEM Chevrolet Nova Fuel Tank we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Nova Fuel Tank Parts Questions & Experts Answers
- Q: How to remove a fuel tank for safety and convenience on Chevrolet Nova?A: For safety and convenience, the fuel tank should be empty before removal if possible. If circumstances permit, run the tank dry, or almost dry, of fuel by normal vehicle usage. If it is necessary to siphon fuel from the tank, use a siphoning kit, available at most auto parts stores. Disconnect the battery ground cable. Disconnect the meter wire at the rear harness connector. Where applicable, push out the grommet in the trunk compartment floor pan and feed the wire through. Raise the vehicle and support it securely on jackstands. Disconnect the fuel hose at the gauge unit fitting. Disconnect the gauge unit ground wire. Remove the tank retaining strap bolts and lower the tank carefully. The fuel tank is retained by two straps. Remove the nuts and allow the straps to pivot down. Installation is the reverse of the removal procedure.
