Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1995-1997 Chevrolet Monte Carlo | LS, LS 4 DOOR, LTZ 4 DOOR, LUMINA, MONTE CARLO | 6 Cyl 3.4L
| Page 1 of 2 |Next >
1-20 of 32 Results
Chevrolet Monte Carlo Engine Mount
Each OEM Chevrolet Monte Carlo Engine Mount we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Monte Carlo Engine Mount Parts Questions & Experts Answers
Q: Should engine mounts be replaced immediately if they are broken or deteriorated in V6 engine on Chevrolet Monte Carlo?
A: Engine mounts seldom require attention, but broken or deteriorated mounts should be replaced immediately to prevent damage or wear to driveline components. To check the mounts, raise the vehicle securely on jackstands and position a jack under the engine oil pan with a large block of wood in between. Carefully raise the engine just enough to relieve the weight from the mounts, ensuring no part of your body is under the engine when it is only supported by a jack. Inspect the mounts for any cracks, hardened rubber, or separation from the bushing, and check for relative movement using a large screwdriver or pry bar. If any movement is detected, lower the engine and tighten the mount fasteners. For replacement, disconnect the cable from the negative battery terminal, raise the vehicle on jackstands, and remove the right front wheel along with the inner fender splash shield. Again, raise the engine slightly to relieve weight from the mounts, taking care not to disconnect more than one mount at a time unless the engine is being removed. Detach the mount from the chassis bracket and remove the nuts holding the mount to the engine bracket. Installation follows the reverse order of removal, using thread-locking compound on the mount bolts and ensuring they are tightened securely before reconnecting the battery.