How do you remove and install the Hood Cable and latches on Chevrolet Malibu?

Before the elimination of the primary latch, it is necessary to release the hood ajar switch if it is installed, and then release the cables of the lock from the clips on the radiator support. Locate the position where the mounting bolts of the latch and the body are positioned then remove the bolts which hold the latch to the core support, and free the hooks of the hood release cables from the latch levers by separating the head of the cables from the housing. Pull out the latch cables from the clips, pull the lever with hand to release the end of primary cable from the slot, press the tabs, and insert the cable housing through the hole to take out the latch assembly. For installation reverse the process of removal, fix the latch in the correct position by the help of lines marked before. To remove the secondary latch you can take out the mounting bolts for it and unplug the cable from either of the latches. To discharge the primary cable and interior release handle, remove and re-locate coolant expansion tank without removing the cooling hoses, then separate the primary release latch from the clips and pulled out the mounting bolts. Insert the hood release cable grommet in the firewall, insert a flat screwdriver under the tab of the release handle then pull it off the knee bolster panel, then unlock the interior handle and link it with the other end of the cable. For easy pulling of the old cable through the firewall, it is advisable to attach a piece of string or small wire on the cable. Installation is the reverse of the removal process For instance, if the string or wires where used to pull the cable through the firewall then use the same to pull the new cable through the same wall.

Genuine Chevrolet Malibu Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Hood Cables found

View related parts
Chevrolet Malibu Cable Assembly, Hood Primary Latch Release(W/Handle) *Black
Part Number: 23434316
$41.53 MSRP: $62.10
You Save: $20.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Replaces: 23439956, 22770129, 13312787, 20944973
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Cable,Hood Primary Latch Release
Part Number: 25868221
$37.87 MSRP: $54.43
You Save: $16.56 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR HYBRID, 4 DOOR NOTCHBACK, BASE 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR NOTCHBACK, MAXX SS 4 DOOR HATCHBACK, SS 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Cable Assembly, Hood Secondary Latch Release
Part Number: 84156352
$36.06 MSRP: $54.64
You Save: $18.58 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Secd Lat Rel; Release Cable, Release Lever
- Replaces: 23282313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Handle,Hood Primary Latch Release Cable (W/O Cable)
Part Number: 13503692
$25.82 MSRP: $38.61
You Save: $12.79 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HANDLE, Hood Latch; Release Cable, Release Handle
- Replaces: 95196696
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Cable Assembly, Hood Primary Latch Release *Black
Part Number: 84100312
$41.53 MSRP: $62.10
You Save: $20.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Hood Prim Lat Rel *Jet Black; Release Cable
- Replaces: 23356304
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Cable Assembly, Hood Primary Latch Release
Part Number: 25878724
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Replaces: 25817511, 15861510, 15936419, 22717576
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Malibu | 4 DOOR HATCHBACK, 4 DOOR NOTCHBACK, LS 4 DOOR HATCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR HATCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 6 Cyl 3.5L
View related parts
Chevrolet Malibu Cable,Hood Primary Latch Release
Part Number: 22664351
Product Specifications
- Other Name: CABLE, Hood Latch; Release Cable
- Replaces: 22614207, 22635591
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Chevrolet Malibu | 4 DOOR, 4 DOOR NOTCHBACK, CLASSIC 4 DOOR NOTCHBACK, LS 4 DOOR, LS 4 DOOR NOTCHBACK, LX 4 DOOR | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.1L

Chevrolet Malibu Hood Cable

Each OEM Chevrolet Malibu Hood Cable we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Hood Cable Parts Questions & Experts Answers

Cable Assembly, Hood Primary Latch Release(W/Handle) *Black
23434316
Q: How do you remove and install the Hood Cable and latches on Chevrolet Malibu?
A: Before the elimination of the primary latch, it is necessary to release the hood ajar switch if it is installed, and then release the cables of the lock from the clips on the radiator support. Locate the position where the mounting bolts of the latch and the body are positioned then remove the bolts which hold the latch to the core support, and free the hooks of the hood release cables from the latch levers by separating the head of the cables from the housing. Pull out the latch cables from the clips, pull the lever with hand to release the end of primary cable from the slot, press the tabs, and insert the cable housing through the hole to take out the latch assembly. For installation reverse the process of removal, fix the latch in the correct position by the help of lines marked before. To remove the secondary latch you can take out the mounting bolts for it and unplug the cable from either of the latches. To discharge the primary cable and interior release handle, remove and re-locate coolant expansion tank without removing the cooling hoses, then separate the primary release latch from the clips and pulled out the mounting bolts. Insert the hood release cable grommet in the firewall, insert a flat screwdriver under the tab of the release handle then pull it off the knee bolster panel, then unlock the interior handle and link it with the other end of the cable. For easy pulling of the old cable through the firewall, it is advisable to attach a piece of string or small wire on the cable. Installation is the reverse of the removal process For instance, if the string or wires where used to pull the cable through the firewall then use the same to pull the new cable through the same wall.