How do you disconnect the cable from the negative terminal of the battery and remove the bumper cover on Chevrolet Malibu?

Disconnect the cable from the negative terminal of the battery. For the front bumper cover on 2015 and earlier models (and 2016 Malibu Limited), open the hood, apply the parking brake, raise the vehicle, and support it securely on jackstands before removing the front wheels. The front fenderwell splash shield consists of two parts. Remove the fasteners securing the front portion of the splash shield, then take off the frontmost part. Next, remove the upper fasteners along the radiator support and the lower fasteners from beneath the vehicle. Detach the fastener at each side securing the bumper cover to the fender, and loosen the lower bumper cover impact bar rear bolts a few turns. If equipped, remove the bolts retaining the shutter assembly. Use a plastic trim tool to gently pry between the bumper cover and the fender, working it off the headlight housing until it is free, with assistance to prevent it from falling. Carefully pull the bumper cover away from the vehicle while checking for and disconnecting any electrical connectors. Installation is the reverse of removal. For 2016 and later models (except 2016 Malibu Limited), follow similar initial steps, but only remove the front inner fender splash shield fasteners to reposition it for bumper cover removal. Remove the front inner fender splash shields, the bolt from inside each fenderwell, the upper side bolts along with the plastic retaining braces, and the lower radiator splash shield. Remove the bumper cover upper mounting bolts, ensuring assistance is available when pulling off the bumper cover. Use a plastic trim tool to pry between the bumper cover and the fender, working it off the headlight housing until it is free, and check for electrical connectors while pulling it away. Installation is the reverse of removal. For the rear bumper cover, remove the rear inner fender splash shield fasteners at each side, the rear bumper cover fenderwell fastener from each side, and the rear underbody air shield if equipped, along with the bumper cover lower fasteners. Use a plastic trim tool to pry between the bumper cover and the rear fender, working it off the fender bracket and taillight housing until it is free, with assistance to prevent it from falling. Pull the bumper cover out and away from the vehicle, disconnecting any necessary electrical connectors. Installation is the reverse of removal. To access the impact beam, remove the front or rear bumper cover, then if equipped, remove the pushpins retaining the air baffles and the baffles from the impact beam. On 2015 and earlier models, remove the right side headlight housing, noting the two impact beam mounting bolts and nuts located on the right side of the beam. Loosen the impact beam bolts, detach any wiring harnesses, then support and remove it from the vehicle. Installation is the reverse of removal.

Genuine Chevrolet Malibu Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

42 Bumpers found

View related parts
Chevrolet Malibu Front Bumper, Cover Lower
Part Number: 23478398
$182.93 MSRP: $272.35
You Save: $89.42 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia,Front Bumper Lower Lwr; Lower Cover
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Front Bumper Cover
Part Number: 22883320
$337.81 MSRP: $504.95
You Save: $167.14 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front Bumper; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Front Bumper, Cover
Part Number: 20832808
$289.16 MSRP: $434.25
You Save: $145.09 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face; Bumper Cover
- Position: Front
- Replaces: 25955767, 25905354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L
View related parts
Chevrolet Malibu Rear Bumper, Cover *Service Primer
Part Number: 84276886
$389.11 MSRP: $582.00
You Save: $192.89 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Rear Bumper *Service Primer; Bumper Cover
- Position: Rear
- Replaces: 23352770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Rear Bumper Cover (Maxx "Stainless Steel" Primed)
Part Number: 89025067
$101.01 MSRP: $145.16
You Save: $44.15 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia,Rear Bumper (Maxx "Stainless Steel" Primed); Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Malibu | MAXX SS 4 DOOR HATCHBACK | 4 Cyl 2.2L, 6 Cyl 3.5L, 6 Cyl 3.9L
View related parts
Chevrolet Malibu Rear Bumper Cover (W/Rear License Plate Lamp)
Part Number: 20822486
$125.72 MSRP: $180.67
You Save: $54.95 (31%)
ADD TO CART
Product Specifications
- Other Name: Fascia,Rear Bumper (W/Rear License Plate Lamp)
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Malibu | LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
Chevrolet Malibu Rear Bumper Cover Upper
Part Number: 22827125
$372.06 MSRP: $561.45
You Save: $189.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia,Rear Bumper Upper; Bumper Cover
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Front Bumper Cover *Service Primer
Part Number: 23146557
$433.94 MSRP: $649.33
You Save: $215.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front Bumper *Service Primer; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Front Bumper Cover *Serv Primer
Part Number: 84543709
$502.23 MSRP: $755.28
You Save: $253.05 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Front Bpr Upr *Serv Primer; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Rear Bumper, Cover Upper *Serv Primer
Part Number: 84543715
$396.69 MSRP: $593.39
You Save: $196.70 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Rear Bpr Upr *Serv Primer; Bumper Cover
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Front Bumper Cover
Part Number: 84042375
$435.85 MSRP: $652.20
You Save: $216.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Bumper Cover
- Position: Front
- Replaces: 23352753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Rear Bumper, Bumper Cover
Part Number: 20959329
$278.60 MSRP: $396.95
You Save: $118.35 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Rear Bumper (W/ Rear License Plate Lamp) *Paint To Mat ; Fascia, Front And Rear Bumper/Fascia Face; Bumper Cover
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chevrolet Malibu | LS 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chevrolet Malibu Front Bumper Cover *Service Primer
Part Number: 84042377
$435.85 MSRP: $652.20
You Save: $216.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Front Bumper *Service Primer; Bumper Cover
- Position: Front
- Replaces: 23393566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Front Bumper Cover Lower
Part Number: 84584222
$186.28 MSRP: $277.39
You Save: $91.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front Bpr Lwr; Lower Cover
- Position: Front Lower
- Replaces: 84515103
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | L 4 DOOR NOTCHBACK, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK, RS 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Rear Bumper, Cover *Service Primer
Part Number: 84276884
$388.10 MSRP: $580.48
You Save: $192.38 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Rear Bumper *Service Primer; Bumper Cover
- Position: Rear
- Replaces: 23352767
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Rear Bumper Cover Upper
Part Number: 22827126
$279.10 MSRP: $395.41
You Save: $116.31 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia,Rear Bumper Upper; Bumper Cover
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Rear Bumper Cover Upper
Part Number: 22827124
$394.13 MSRP: $589.53
You Save: $195.40 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia,Rear Bumper Upper; Bumper Cover
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2016 Chevrolet Malibu | LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.0L, 4 Cyl 2.4L, 4 Cyl 2.5L
View related parts
Chevrolet Malibu Rear Bumper Cover *Service Primer
Part Number: 25919219
$177.17 MSRP: $252.43
You Save: $75.26 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Rear Bumper *Service Primer ; Fascia, Front And Rear Bumper/Fascia Face; Bumper Cover
- Position: Rear
- Replaces: 15934273
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | 4 DOOR HYBRID, LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.2L, 4 Cyl 2.4L, 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L
View related parts
Chevrolet Malibu Front Bumper Cover
Part Number: 84042376
$423.31 MSRP: $633.36
You Save: $210.05 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Bumper Cover
- Position: Front
- Replaces: 23352755
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Malibu | LT 4 DOOR NOTCHBACK, LT HYBRID 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L
View related parts
Chevrolet Malibu Front Bumper Cover *Serv Primer
Part Number: 84543707
$452.33 MSRP: $680.00
You Save: $227.67 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly, Front Bpr Upr *Serv Primer; Bumper Cover
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Malibu | LTZ 4 DOOR NOTCHBACK | 4 Cyl 1.5L, 4 Cyl 1.8L, 4 Cyl 2.0L

| Page 1 of 3 |Next >

1-20 of 42 Results

Chevrolet Malibu Bumper

Each OEM Chevrolet Malibu Bumper we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Malibu Bumper Parts Questions & Experts Answers

Rear Bumper, Cover *Service Primer
84276886
Q: How do you disconnect the cable from the negative terminal of the battery and remove the bumper cover on Chevrolet Malibu?
A: Disconnect the cable from the negative terminal of the battery. For the front bumper cover on 2015 and earlier models (and 2016 Malibu Limited), open the hood, apply the parking brake, raise the vehicle, and support it securely on jackstands before removing the front wheels. The front fenderwell splash shield consists of two parts. Remove the fasteners securing the front portion of the splash shield, then take off the frontmost part. Next, remove the upper fasteners along the radiator support and the lower fasteners from beneath the vehicle. Detach the fastener at each side securing the bumper cover to the fender, and loosen the lower bumper cover impact bar rear bolts a few turns. If equipped, remove the bolts retaining the shutter assembly. Use a plastic trim tool to gently pry between the bumper cover and the fender, working it off the headlight housing until it is free, with assistance to prevent it from falling. Carefully pull the bumper cover away from the vehicle while checking for and disconnecting any electrical connectors. Installation is the reverse of removal. For 2016 and later models (except 2016 Malibu Limited), follow similar initial steps, but only remove the front inner fender splash shield fasteners to reposition it for bumper cover removal. Remove the front inner fender splash shields, the bolt from inside each fenderwell, the upper side bolts along with the plastic retaining braces, and the lower radiator splash shield. Remove the bumper cover upper mounting bolts, ensuring assistance is available when pulling off the bumper cover. Use a plastic trim tool to pry between the bumper cover and the fender, working it off the headlight housing until it is free, and check for electrical connectors while pulling it away. Installation is the reverse of removal. For the rear bumper cover, remove the rear inner fender splash shield fasteners at each side, the rear bumper cover fenderwell fastener from each side, and the rear underbody air shield if equipped, along with the bumper cover lower fasteners. Use a plastic trim tool to pry between the bumper cover and the rear fender, working it off the fender bracket and taillight housing until it is free, with assistance to prevent it from falling. Pull the bumper cover out and away from the vehicle, disconnecting any necessary electrical connectors. Installation is the reverse of removal. To access the impact beam, remove the front or rear bumper cover, then if equipped, remove the pushpins retaining the air baffles and the baffles from the impact beam. On 2015 and earlier models, remove the right side headlight housing, noting the two impact beam mounting bolts and nuts located on the right side of the beam. Loosen the impact beam bolts, detach any wiring harnesses, then support and remove it from the vehicle. Installation is the reverse of removal.