How to address fuel tank leaks or damage?

The fuel tank is plastic and cannot be repaired. There are no reliable repair procedures available to correct leaks or damage. The only approved service is fuel tank replacement. If there is sediment at the bottom of the tank, it should be steam-cleaned. The fuel pump/level sensor module and all EVAP system components should be removed prior to cleaning. It is important to allow the tank to air-dry thoroughly before returning it to service.

How do you remove the fuel tank?

To remove the fuel tank, start by relieving the fuel system pressure and disconnecting the negative battery terminal. Then, raise the vehicle and secure it on jackstands. If necessary, remove the exhaust system underneath the fuel tank. Next, disconnect the EVAP system vent line and the fuel tank filler neck hose clamp. If the tank is not empty, siphon or pump out the remaining fuel. Disconnect the fuel supply line and EVAP purge line quick-connect fittings and remove the fuel tank shield. Support the fuel tank and remove the bolts securing the longitudinal straps. Lower the tank enough to access the fuel pump/fuel level sensor module and the EVAP canister, and disconnect the necessary connections. Finally, lower the tank completely. For installation, simply reverse the removal steps.

Genuine Chevrolet Impala Fuel Tank

Gas Tank

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Fuel Tanks found

View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 12777874
$628.30 MSRP: $947.68
You Save: $319.38 (34%)
ADD TO CART
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 2.4L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 22781636
$891.65 MSRP: $1344.86
You Save: $453.21 (34%)
ADD TO CART
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK, LTZ 4 DOOR NOTCHBACK | 4 Cyl 2.4L, 4 Cyl 2.5L, 6 Cyl 3.6L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 22878267
$912.40 MSRP: $1376.44
You Save: $464.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Replaces: 22738313, 20827317, 25800687
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2016 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.6L, 6 Cyl 3.9L Flex, 8 Cyl 5.3L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 21996603
$179.22 MSRP: $269.10
You Save: $89.88 (34%)
Product Specifications
- Other Name: TANK, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Impala | IMPALA, LS, POLICE CAR, SS | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 15892001
Product Specifications
- Other Name: TANK, Fuel
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Impala | LS, LT, SS | 6 Cyl 3.5L, 6 Cyl 3.5L Flex, 6 Cyl 3.9L, 8 Cyl 5.3L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 10257314
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | CLASSIC STATION WAGON | 8 Cyl 5.7L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 25800686
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Replaces: 15898777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Impala | LS, LTZ | 6 Cyl 3.6L
- 2007-2010 Chevrolet Impala | LS, LS POLICE CAR, LT, LT 3.5, LTZ, SS | 6 Cyl 3.5L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 10218495
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Replaces: 10207964
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | CLASSIC 4 DOOR, LS 4 DOOR | 8 Cyl 5.7L
View related parts
Chevrolet Impala Tank Assembly, Fuel
Part Number: 15141578
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Replaces: 10330790, 10429445, 10301359, 10427337, 10448184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Impala | IMPALA, LS, LT | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Tank Asm,Fuel
Part Number: 25320899
Product Specifications
- Other Name: TANK, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2001 Chevrolet Impala | LUMINA | 6 Cyl 3.4L, 6 Cyl 3.8L
View related parts
Chevrolet Impala Tank Kit, Cng
Part Number: 23271790
Product Specifications
- Other Name: TANK KIT, Fuel; Fuel Tank
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Impala | LS 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 6 Cyl 3.6L

Chevrolet Impala Fuel Tank

Fuel Tank of Chevrolet Impala is one of the vital parts and performs the vital function of containing liquid fuel and vapor effectively. Sited at the rear part of the vehicle, the fuel tank has an opening adequate for refueling; this opening is closed by a cap. Besides the storage of gasoline, the fuel tank also contains the fuel gauge sender and the electric fuel pump It also contains baffle which prevents the gasoline from splashing around and also reduces the noises that may be resulted from the movement of the gasoline in the fuel tank. Besides, the fuel tank is involved in the Evaporative Emission Control System or EVAP to make sure that dangerous fuel vapors do not leak out and pollute the environment. Periodically, the fuel tank and its components are likely to undergo flaws to things like corrosion, high temperatures, and mechanical vibration, which in the end lead to instances like pressure build up or damage of the sensor. When selecting the new fuel tank for the Chevrolet Impala, one should consider certain aspects, including fit and quality, among others.

Each OEM Chevrolet Impala Fuel Tank we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Impala Fuel Tank Parts Questions & Experts Answers

Tank Assembly, Fuel
22878267
Q: How to address fuel tank leaks or damage?
A: The fuel tank is plastic and cannot be repaired. There are no reliable repair procedures available to correct leaks or damage. The only approved service is fuel tank replacement. If there is sediment at the bottom of the tank, it should be steam-cleaned. The Fuel Pump/level sensor module and all EVAP system components should be removed prior to cleaning. It is important to allow the tank to air-dry thoroughly before returning it to service.
Tank Assembly, Fuel
22878267
Q: How do you remove the fuel tank?
A: To remove the fuel tank, start by relieving the fuel system pressure and disconnecting the negative battery terminal. Then, raise the vehicle and secure it on jackstands. If necessary, remove the exhaust system underneath the fuel tank. Next, disconnect the EVAP system vent line and the fuel tank filler neck hose clamp. If the tank is not empty, siphon or pump out the remaining fuel. Disconnect the fuel supply line and EVAP purge line quick-connect fittings and remove the fuel tank shield. Support the fuel tank and remove the bolts securing the longitudinal straps. Lower the tank enough to access the Fuel Pump/fuel level sensor module and the EVAP canister, and disconnect the necessary connections. Finally, lower the tank completely. For installation, simply reverse the removal steps.