How to remove and replace the ignition coil pack in a Chevrolet Cobalt,HHR and Saturn ION?

To remove the ignition coil, remove the intake manifold cover, and disconnect the electrical connector from the ignition control module. Replace if necessary and coat the interior of each boot with silicone dielectric compound before reinstallation. For other models, turn the ignition key to OFF, remove the engine cover, disconnect the electrical connector from the ignition coils, remove the coil mounting bolt(s) and pull the coil(s) from the valve cover.

Genuine Chevrolet HHR Ignition Coil

Ignition Coil Resistor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Ignition Coils found

View related parts
Chevrolet HHR Ignition Coil Assembly
Part Number: 12638824
$43.33 MSRP: $74.58
You Save: $31.25 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Coil Assembly, Ignition ; Coil, Ignition Coil; Coil, Ignition Coil
- Replaces: 12629646, 12578224
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2011 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR HIGH ROOF HATCHBACK SS, 5 DOOR HIGH ROOF PANEL, 5 DOOR HIGH ROOF PANEL SS, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF PANEL | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.2L Flex, 4 Cyl 2.4L
View related parts
Chevrolet HHR Ignition Coil Assembly
Part Number: 12587426
Product Specifications
- Other Name: Coil Assembly, Ignition ; Coil, Ignition Coil; Coil, Ignition Coil, Ignition Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet HHR | 5 DOOR HIGH ROOF HATCHBACK, 5 DOOR UPLEVEL HIGH ROOF HATCHBACK | 4 Cyl 2.2L

Chevrolet HHR Ignition Coil Parts Questions & Experts Answers

Ignition Coil Assembly
12638824
Q: How to remove and replace the ignition coil pack in a Chevrolet Cobalt,HHR and Saturn ION?
A: To remove the ignition coil, remove the intake manifold cover, and disconnect the electrical connector from the Ignition Control Module. Replace if necessary and coat the interior of each boot with silicone dielectric compound before reinstallation. For other models, turn the ignition key to OFF, remove the engine cover, disconnect the electrical connector from the ignition coils, remove the coil mounting bolt(s) and pull the coil(s) from the valve cover.