How do I remove the brake light switch and brake pedal position sensor for Chevrolet Equinox and GMC Terrain?

To remove the brake light switch, remove the insulator panel, disconnect the wiring connector(s) from the switch, depress the brake pedal, and compress the switch's lock tabs. To install the new switch, ensure that the pedal is at the top of its travel. Apply the brake pedal, release it, and verify that the brake lights go off when the pedal is released. To remove the brake pedal position sensor, disconnect the electrical connector. Installation is the reverse of removal.

Genuine Chevrolet Equinox Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Light Switches found

View related parts
Chevrolet Equinox Sensor Assembly, Brake Pedal Position
Part Number: 13597423
$34.02 MSRP: $64.18
You Save: $30.16 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Pedal Travel Sensor, Sensor, Stoplamp Switch
- Replaces: 13583370
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Sensor Assembly, Brake Pedal Position
Part Number: 13597424
$29.87 MSRP: $56.38
You Save: $26.51 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Pedal Travel Sensor, Sensor, Stoplamp Switch
- Replaces: 13583371
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Equinox | 4 DOOR BASE (GMNA), 4 DOOR LT (GMNA), 4 DOOR LTZ (GMNA) | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox Switch Assembly, Stop Lamp & Automatic Transmission Shift Lock & Cruise Control
Part Number: 22625273
$24.87 MSRP: $39.10
You Save: $14.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch; Stoplamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L
View related parts
Chevrolet Equinox Sensor Assembly, Brake Pedal Position
Part Number: 13597428
$9.10 MSRP: $16.54
You Save: $7.44 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Clutch Switch, Stoplamp Switch
- Replaced by: 13549051
- Replaces: 13583976, 15192340
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV, SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.4L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Sensor Assembly, Brake Pedal Position
Part Number: 13579089
$11.80 MSRP: $22.25
You Save: $10.45 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Stoplamp Switch
- Replaces: 22769186, 12842794
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L

Chevrolet Equinox Brake Light Switch Parts Questions & Experts Answers

Switch Assembly, Stop Lamp & Automatic Transmission Shift Lock & Cruise Control
22625273
Q: How do I remove the brake light switch and brake pedal position sensor for Chevrolet Equinox and GMC Terrain?
A: To remove the brake light switch, remove the insulator panel, disconnect the wiring connector(s) from the switch, depress the brake pedal, and compress the switch's lock tabs. To install the new switch, ensure that the pedal is at the top of its travel. Apply the brake pedal, release it, and verify that the brake lights go off when the pedal is released. To remove the brake pedal position sensor, disconnect the electrical connector. Installation is the reverse of removal.