How to inspect the brake disc on Chevrolet Equinox?

To inspect the brake disc, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and then the brake caliper, making sure not to disconnect the brake hose. Suspend the caliper out of the way with wire, avoiding any strain on the hose. Reinstall three lug nuts (inverted) to hold the disc against the hub, using washers if necessary. Visually inspect the disc surface for score marks, cracks, and other damage. Light scratches and shallow grooves are normal, but deep score marks or cracks may require disc refinishing or replacement. Check both sides of the disc and look for pulsation or loud grinding noises during brake application, which may indicate damaged or worn discs. To check disc runout, place a dial indicator about 1/2-inch from the outer edge of the disc and turn it. If the indicator reading exceeds 0.003 of an inch, disc refinishing or replacement is needed. Ensure the disc is not machined to a thickness less than the specified minimum refinish thickness, which can be checked with a micrometer. For removal, remove the caliper mounting bracket, cleaning the bolt threads and holes and applying new thread-locking compound during installation. Mark the disc in relation to the hub, remove the bolt securing the disc to the hub flange, and use a mallet if necessary to loosen the disc. Clean the hub flange and inside of the brake disc, removing any rust or corrosion, and then securely tighten the retaining bolt when installing the disc onto the hub assembly. To install, first install the caliper mounting bracket and tighten the bolts to the specified torque. Place the caliper over the disc and onto the mounting bracket, installing and tightening the caliper mounting bolts to the specified torque. Install the wheel, lower the vehicle, and tighten the wheel lug nuts to the specified torque. Depress the brake pedal a few times to bring the brake pads into contact with the disc. Bleeding the system is not necessary unless the brake hose was disconnected. Thoroughly check the brake operation before putting the vehicle into normal service.

Genuine Chevrolet Equinox Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Discs found

View related parts
Chevrolet Equinox Front Brake Rotor
Part Number: 23118055
$89.77 MSRP: $178.11
You Save: $88.34 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Rotor
- Position: Front
- Replaces: 13501320
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Rotor, Rear Brk (Ctd)
Part Number: 13544245
$68.12 MSRP: $135.15
You Save: $67.03 (50%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Rotor
- Position: Rear
- Replaces: 13513888, 13517854, 13513886, 13583682
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox ROTOR-FRT BRK (CTD)
Part Number: 13552823
$79.45 MSRP: $157.63
You Save: $78.18 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaces: 13537160, 13517845
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | 4 DOOR BASE , 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox Front Brake Rotor
Part Number: 13518653
$89.82 MSRP: $178.21
You Save: $88.39 (50%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake ; Rotor, Frt Brk; Rotor
- Position: Front
- Replaces: 13517850, 13517847, 13583718
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Chevrolet Equinox | 4 DOOR LT , 4 DOOR LTZ | 4 Cyl 1.5L, 4 Cyl 1.6L Diesel, 4 Cyl 2.0L
View related parts
Chevrolet Equinox Rear Brake Rotor
Part Number: 20792027
$178.32 MSRP: $353.80
You Save: $175.48 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Rear Brake ; Rotor, Front And Rear Wheel Brake; Rotor
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LS SUV, LT SUV, LTZ SUV | 4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Front Brake Rotor
Part Number: 20892949
$83.01 MSRP: $164.71
You Save: $81.70 (50%)
ADD TO CART
Product Specifications
- Other Name: Rotor,Front Brake; Rotor
- Position: Front
- Replaces: 15837488, 25804049
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | SS SUV AWD, SS SUV FWD, SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Rear Brake Rotor
Part Number: 20892952
$104.15 MSRP: $203.60
You Save: $99.45 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor,Rear Brake; Rotor
- Position: Rear
- Replaces: 15223784, 25804046
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Chevrolet Equinox | SUV AWD, SUV FWD | 6 Cyl 3.4L, 6 Cyl 3.6L
View related parts
Chevrolet Equinox Front Brake Rotor
Part Number: 22666578
Product Specifications
- Other Name: Rotor, Front Brake ; Rotor, Front And Rear Wheel Brake; Rotor
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Equinox | SUV AWD, SUV FWD, SUV LT AWD, SUV LT FWD | 6 Cyl 3.4L

Chevrolet Equinox Brake Disc

Chevrolet Equinox Brake Disc is part of the disc brake system and this component is main responsible for providing the desired friction that is required for the braking of vehicle. On the wheel hub there is the brake disc or rotor collaborates with brake pads and calipers. When brakes are applied, hydraulic pressure work on the caliper to press the pads on the rotor a process which slows down the Equinox. For the years of production, Chevrolet has incorporated several systems of brake discs namely, the solid and the vented rotors. Rots with air intake slots or cooling fins to expel heat more than non-vented rotors that are found in compact non-performance variants. First of all further design features as drilled or slotted discs enhance the thermal capacity as operating as acoustic components, even though the wear of the pad is affected due to this. It is, therefore, mandatory to always service and examine the brake disc to allow more effective use by Chevrolet Equinox.

Each OEM Chevrolet Equinox Brake Disc we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Equinox Brake Disc Parts Questions & Experts Answers

Front Brake Rotor
23118055
Q: How to inspect the brake disc on Chevrolet Equinox?
A: To inspect the brake disc, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the wheel and then the brake caliper, making sure not to disconnect the brake hose. Suspend the caliper out of the way with wire, avoiding any strain on the hose. Reinstall three lug nuts (inverted) to hold the disc against the hub, using washers if necessary. Visually inspect the disc surface for score marks, cracks, and other damage. Light scratches and shallow grooves are normal, but deep score marks or cracks may require disc refinishing or replacement. Check both sides of the disc and look for pulsation or loud grinding noises during brake application, which may indicate damaged or worn discs. To check disc runout, place a dial indicator about 1/2-inch from the outer edge of the disc and turn it. If the indicator reading exceeds 0.003 of an inch, disc refinishing or replacement is needed. Ensure the disc is not machined to a thickness less than the specified minimum refinish thickness, which can be checked with a micrometer. For removal, remove the caliper mounting bracket, cleaning the bolt threads and holes and applying new thread-locking compound during installation. Mark the disc in relation to the hub, remove the bolt securing the disc to the hub flange, and use a mallet if necessary to loosen the disc. Clean the hub flange and inside of the brake disc, removing any rust or corrosion, and then securely tighten the retaining bolt when installing the disc onto the hub assembly. To install, first install the caliper mounting bracket and tighten the bolts to the specified torque. Place the caliper over the disc and onto the mounting bracket, installing and tightening the caliper mounting bolts to the specified torque. Install the wheel, lower the vehicle, and tighten the wheel lug nuts to the specified torque. Depress the brake pedal a few times to bring the Brake Pads into contact with the disc. Bleeding the system is not necessary unless the brake hose was disconnected. Thoroughly check the brake operation before putting the vehicle into normal service.