Other Name: Column Assembly, Strg; Steering Column
Replaces: 39060146, 39094317, 39082841, 39017366
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2019 Chevrolet Cruze | LS (GMNA), LS 4 DOOR HATCHBACK(GMNA), LS 4 DOOR SEDAN, LT (GMNA), LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ (GMNA), LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
Other Name: Column Assembly, Strg; Steering Column
Replaced by: 42747051
Replaces: 39094318, 39060147, 39017367, 39082842
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2018 Chevrolet Cruze | LS (GMNA), LS 4 DOOR SEDAN, LT (GMNA), LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN, LTZ (GMNA), LTZ 4 DOOR HATCHBACK, LTZ 4 DOOR SEDAN | 4 Cyl 1.4L, 4 Cyl 1.6L Diesel
A: To remove the steering column, start by parking the vehicle with the wheels straight ahead and disconnecting the battery's negative terminal. Disable the airbag system and then remove the Steering Wheel and steering column covers. Next, take out the clockspring/multi-function switch assembly and the knee bolster. Disconnect the electrical connector for the shift interlock solenoid from the ignition lock cylinder, as well as any other electrical connectors that may interfere with removal. Mark the relationship of the steering column shaft to the intermediate shaft and remove the pinch bolt. Finally, remove the steering column mounting fasteners and guide the column out from the instrument panel. To install the steering column, guide it back into position and connect the steering shaft with the intermediate shaft, aligning the marks. Install the mounting fasteners and tighten them to the proper torque specifications. Then, install the pinch bolt and tighten it to the correct torque specifications. The remainder of the installation process is the reverse of the removal steps.