My Garage
My Account
Cart
Genuine Chevrolet Cruze Fog Light Bulb
Fog Lamp Bulb- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
5 Fog Light Bulbs found
Chevrolet Cruze Bulb,Front Fog Lamp
Part Number: 13500802$21.53 MSRP: $40.61You Save: $19.08 (47%)Ships in 1-2 Business Days
Chevrolet Cruze Bulb, Stop & Turn Signal & Rear Side Marker Lamp
Part Number: 13591404$6.76 MSRP: $12.76You Save: $6.00 (48%)Ships in 1-2 Business Days
Chevrolet Cruze Bulb, Back Up Lamp (Trade #921Ll)
Part Number: 22692679$3.36 MSRP: $6.34You Save: $2.98 (47%)Ships in 1 Business Day
Chevrolet Cruze Bulb Assembly, Headlamp
Part Number: 13503417$14.28 MSRP: $26.94You Save: $12.66 (47%)Ships in 1 Business Day
Chevrolet Cruze Bulb, Turn Signal
Part Number: 13503356$4.69 MSRP: $8.42You Save: $3.73 (45%)Ships in 1-3 Business Days
Chevrolet Cruze Fog Light Bulb
The Fog Light Bulbs are used mainly on Chevrolet Cruze vehicles in order to improve the visibility on the road especially in instances when there is fog, rain or snow. These bulbs are installed low on a vehicle and emit a broad beam directed toward the bottom and give little light that will blind other drivers while offering the driver a clear view of the road ahead. That said, through the years, Chevrolet Cruze has used the basic Halogen Fog Light Bulbs as well as better substitutes for the same. Standard Halogen bulbs are adequate in terms of illumination but enhanced Halogen bulbs are 50% brighter and come in different Kelvin range thus improving visibility. Moreover, the LED Fog Light Bulbs have added benefits with regard to life per operation, less power consumption, and it also cannot be affected by the vibrations possible through harsh roads. It's wise to always replace the Fog Light Bulbs after some time in order to achieve efficiency and safety.
Each OEM Chevrolet Cruze Fog Light Bulb we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Cruze Fog Light Bulb Parts Questions & Experts Answers
- Q: How do you replace the turn signal or Fog Light Bulb on Chevrolet Cruze?A: To replace the front turn signal or parking light bulbs, turn the bulb holder counterclockwise and remove it from the housing, noting that for the left-side bulb, the windshield washer reservoir neck may need to be removed for access. Pull the turn signal bulb straight out of the socket, and installation is the reverse of removal. For fog light bulbs, access them from underneath the bumper cover or through the inner fender liner after raising the front of the vehicle on jackstands. Rotate the bulb socket counterclockwise, pull it out, disconnect the electrical connector, remove the bulb from the socket, and reinstall in reverse order. For front side marker bulbs, remove the inner fender splash shield, disconnect the electrical connector, and remove the bulb holder from the housing before pulling the bulb from the holder, with installation being the reverse of removal. The center-mount brake light, equipped with LED lights, requires working inside the trunk to remove screws, disengage the housing fastener, and for Notch back models, pull down the headliner to access the brake light nuts. Disconnect the electrical connector and remove the brake light, with installation being the reverse of removal. For brake tail turn side marker or back-up light bulbs, open the trunk, pry open screw covers, and remove screws before pulling the tail light housing straight back. On Hatchback or Notch back models, open the rear liftgate and remove the access panel to pull the light assembly. Rotate the bulb holder counterclockwise to replace the desired bulb, pull it straight out, and reinstall in reverse order. For license plate light bulbs, on 2015 and earlier models, remove screws securing the lens and light, rotate the bulb holder counterclockwise to remove it, and reinstall in reverse order. For 2016 and later models, push the license plate lens towards the outside, pull the right end out, and replace the bulb by pulling it from the socket before sliding the lens back into place. For dome, map/reading, or trunk light bulbs, carefully pry the lens out, pull the bulb from the socket, and reinstall in reverse order.
