How do you remove and install the release cylinder on Chevrolet Cruze?

Disconnect the quick-connect hydraulic line fitting from the Clutch Slave Cylinder, ensuring that the Clutch Slave Cylinder line seal does not remain in the elbow upon removal. Next, remove the transaxle. After that, take out the fasteners securing the Clutch Slave Cylinder to the transaxle and slide the Clutch Slave Cylinder assembly off the transaxle input shaft. For installation, reverse the removal process while noting to lubricate the inside diameter of the bearing with a light film of high-temperature grease, apply a thread locking compound to the Clutch Slave Cylinder mounting fasteners and tighten them to the specified torque, reinstall the transaxle, connect the hydraulic fitting, check the fluid level in the brake fluid reservoir by adding brake fluid that meets DOT 3 specifications until the level is correct, and finally, bleed the system.

Genuine Chevrolet Cruze Clutch Slave Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Clutch Slave Cylinders found

View related parts
Chevrolet Cruze Cylinder Assembly, Clutch Actuator
Part Number: 55593577
$187.75 MSRP: $280.09
You Save: $92.34 (33%)
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator; Slave Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L, 4 Cyl 2.0L Diesel
View related parts
Chevrolet Cruze Cylinder Assembly, Clutch Actuator
Part Number: 55563645
$70.67 MSRP: $123.01
You Save: $52.34 (43%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: CYLINDER, Clutch Hydraulic Release Slave/Actuator
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2012 Chevrolet Cruze | LS 4 DOOR NOTCHBACK, LT / LTZ 4 DOOR NOTCHBACK, LT 4 DOOR NOTCHBACK | 4 Cyl 1.4L, 4 Cyl 1.8L
View related parts
Chevrolet Cruze Cylinder Assembly, Clutch Actuator
Part Number: 55597066
$68.14 MSRP: $107.18
You Save: $39.04 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cylinder Assembly, Clu Actr; Slave Cylinder
- Replaces: 55583074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chevrolet Cruze | LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN | 4 Cyl 1.6L Diesel
View related parts
Chevrolet Cruze CYLINDER KIT,CLU ACTR
Part Number: 24295457
$182.63 MSRP: $248.95
You Save: $66.32 (27%)
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Cruze | LS , LS 4 DOOR SEDAN, LT , LT 4 DOOR HATCHBACK, LT 4 DOOR SEDAN | 4 Cyl 1.4L

Chevrolet Cruze Clutch Slave Cylinder

The Clutch Slave Cylinder in Chevrolet Cruze vehicles is involved in the manual transmission system in that it designed to coordinate with the clutch master cylinder to disconnect the clutch whenever the pedal is pressed to do so. This hydraulic part transmits the pressure exerted by the driver into hydraulic fluid which in turn moves a piston pushing a rod on a lever or a fork to enable shifting of gears safely. In the course of the years, Chesvrolet Cruze models have applied hydraulic clutch slave cylinders, by means of which the proper pedal feel and proper working of the transmission gearages are possible. Common problems with the Clutch Slave Cylinder, for example, leakage, low brake fluid level, can cause problems with the gears and damage to the transmission system, such problems should therefore be repaired immediately. In all, the Clutch Slave Cylinder is very essential for the drive-ability and safety of the Chevrolet Cruze.

Each OEM Chevrolet Cruze Clutch Slave Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cruze Clutch Slave Cylinder Parts Questions & Experts Answers

Cylinder Assembly, Clutch Actuator
55563645
Q: How do you remove and install the release cylinder on Chevrolet Cruze?
A: Disconnect the quick-connect hydraulic line fitting from the Clutch Slave Cylinder, ensuring that the Clutch Slave Cylinder line seal does not remain in the elbow upon removal. Next, remove the transaxle. After that, take out the fasteners securing the Clutch Slave Cylinder to the transaxle and slide the Clutch Slave Cylinder assembly off the transaxle input shaft. For installation, reverse the removal process while noting to lubricate the inside diameter of the bearing with a light film of high-temperature grease, apply a thread locking compound to the Clutch Slave Cylinder mounting fasteners and tighten them to the specified torque, reinstall the transaxle, connect the hydraulic fitting, check the fluid level in the brake fluid reservoir by adding brake fluid that meets DOT 3 specifications until the level is correct, and finally, bleed the system.