How often should you inspect the flexible hoses connecting the steel brake lines to the brake assemblies, and what steps should you follow for replacement on Chevrolet Corvette?

About every six months, with the vehicle raised and securely placed on jackstands, inspect the flexible hoses connecting the steel brake lines to the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial parts of the brake system requiring thorough examination with a light and mirror. If any defects are found, replace the hose with a new one. Begin by cleaning dirt from the hose ends, then use a flare-nut wrench to unscrew the tube nut to avoid rounding off the corners. Remove any bolts or clips securing the hose, and for front hoses, unscrew the brake line fitting while holding the fitting block with another wrench, pull the retaining clip to release the hose from the top bracket, and detach it from the caliper by unscrewing the banjo bolt. For rear hoses, hold the fitting block with pliers, remove the clip, and unscrew the banjo bolt to detach the hose. Disconnect the hose from the caliper, discarding the sealing washers, and attach the new brake hose using new sealing washers, tightening the banjo fitting bolt to the specified torque. Reverse the removal procedure to install the hose, ensuring it is not twisted, and check that suspension or steering components do not contact the hose by having an assistant push down on the vehicle and turn the steering wheel lock-to-lock during inspection. After installation, bleed the brake system. When replacing brake lines, use the correct parts, avoiding copper tubing, and purchase steel brake lines from a dealer or auto parts store. Prefabricated brake lines with flared tube ends and installed fittings are available and can be bent to the proper shapes using a tubing bender. Ensure the new line is well supported in brackets and has sufficient clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid as necessary, bleed the brake system, and carefully test the brakes before returning the vehicle to normal operation.

Genuine Chevrolet Corvette Brake Line

Brake Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

87 Brake Lines found

View related parts
Chevrolet Corvette Pipe,Brake
Part Number: 88983905
$57.67 MSRP: $114.42
You Save: $56.75 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: PIPE, Hydraulic Brake; Brake Line
- Replaces: 25837622, 25837624, 84330459, 22726507, 84380488, 84330461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, 2 DOOR SPECIAL, CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Pipe Assembly, Power Brake Booster Vacuum
Part Number: 20981799
$72.50 MSRP: $131.81
You Save: $59.31 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PIPE, Vacuum Power Brake; Vacuum Tube
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Pipe,Brake (Bulk Tubing 5/16" 8Mm)
Part Number: 12541500
$40.53 MSRP: $63.76
You Save: $23.23 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Standard Parts; Cooler Line, Line, Oil Cooler Tube
- Replaces: 01324714, 1324714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1996 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
- 1984 Chevrolet Corvette | 2 DOOR, CONVERTIBLE | 8 Cyl 5.7L
View related parts
Chevrolet Corvette HOSE ASM,RR BRK
Part Number: 19370736
$15.84 MSRP: $49.61
You Save: $33.77 (69%)
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Replaces: 10345989, 19331540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Hose Assembly, Rear Brake
Part Number: 84251376
$31.78 MSRP: $57.78
You Save: $26.00 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly, Rear Brk; Brake Hose, Flex Hose
- Position: Rear
- Replaces: 20988187
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hose Assembly, Rear Brake
Part Number: 22744112
$19.58 MSRP: $36.94
You Save: $17.36 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOSE, Hydraulic Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Hose Assembly, Rear Brk
Part Number: 84251377
$29.50 MSRP: $55.67
You Save: $26.17 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Rear
- Replaces: 20988188
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Pipe Assembly, Brake Pressure Mod Valve Master Cylinder Reservoir
Part Number: 22781163
$32.51 MSRP: $61.35
You Save: $28.84 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: PIPE, Hydraulic Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Pipe Assembly, P/B Boos Vac
Part Number: 84492718
$66.57 MSRP: $132.09
You Save: $65.52 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Vacuum Tube
- Replaces: 22855912
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hose Asm,Rear Brake
Part Number: 19366780
$31.91 MSRP: $58.02
You Save: $26.11 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: HOSE ASM,RR BRK; Brake Hose, Flex Hose
- Position: Rear
- Replaces: 10307426, 15802376, 20989694
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2013 Chevrolet Corvette | 2 DOOR, 2 DOOR SPECIAL, CONVERTIBLE | 8 Cyl 6.0L, 8 Cyl 6.2L, 8 Cyl 7.0L
View related parts
Chevrolet Corvette Hose Assembly, Front Brk
Part Number: 84251379
$39.51 MSRP: $71.84
You Save: $32.33 (45%)
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Front
- Replaces: 23220065
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | 2 DOOR, 2 DOOR CONVERTIBLE, Z06 2 DOOR CONVERTIBLE, Z06 2 DOOR PLAINBACK | 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hose Assembly, Front Brk
Part Number: 84841277
$21.02 MSRP: $37.71
You Save: $16.69 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Front
- Replaced by: 86538567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hose Assembly, Rear Brk
Part Number: 84810943
$22.57 MSRP: $40.47
You Save: $17.90 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Rear
- Replaces: 84683568
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HOSE ASM-RR BRK
Part Number: 87816735
$61.18 MSRP: $109.74
You Save: $48.56 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Replaced by: 86538588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | LT2 AWD CONVERTIBLE, LT2 AWD COUPE, LT6 CONVERTIBLE, LT6 COUPE, Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Hose Assembly, Front Brk
Part Number: 84841278
$21.02 MSRP: $37.71
You Save: $16.69 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Position: Front
- Replaced by: 86538568
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HOSE ASM-FRT BRK
Part Number: 85560983
$24.76 MSRP: $44.42
You Save: $19.66 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | LT6 CONVERTIBLE, LT6 COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HOSE ASM-FRT BRK
Part Number: 85560984
$24.76 MSRP: $44.42
You Save: $19.66 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Brake Hose, Flex Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | LT6 CONVERTIBLE, LT6 COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HOSE ASM-FRT BRK
Part Number: 85161756
$49.07 MSRP: $88.03
You Save: $38.96 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette HOSE ASM-FRT BRK
Part Number: 86538565
$19.87 MSRP: $35.64
You Save: $15.77 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 85029663
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | Stingray Convertible, STINGRAY CONVERTIBLE, Stingray Coupe, STINGRAY COUPE | 8 Cyl 5.5L, 8 Cyl 6.2L
View related parts
Chevrolet Corvette Pipe Assembly, Rear Brk Frt
Part Number: 84461765
$4.98 MSRP: $8.95
You Save: $3.97 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 Chevrolet Corvette | Stingray Convertible, Stingray Coupe | 8 Cyl 6.2L

| Page 1 of 5 |Next >

1-20 of 87 Results

Chevrolet Corvette Brake Line

The Brake Line is part of the Chevrolet corvette- located in the hydraulic-braking system- translating the amount of pressure applied on the pedal into hydraulic pressure to activate the brake. This is achieved by a system with a master cylinder and a wheel cylinder, Brake Lines and hoses as the means of transferring pressurized brake fluid to the brake pads or shoes. Through the years different Brake Lines have been used in models of Chevrolet Corvette and all of them where intended to provide proper supply of fluid. Any problem in these lines, for example, leaks may drastically affect the braking capability, a characteristic like light-pedal feel or weak brakes. Most of the maintenance tasks for the Chevrolet Corvette's braking system involves the Brake Line, therefore, it is essential to inspect and maintain the system frequently.

Each OEM Chevrolet Corvette Brake Line we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Corvette Brake Line Parts Questions & Experts Answers

Pipe,Brake
88983905
Q: How often should you inspect the flexible hoses connecting the steel brake lines to the brake assemblies, and what steps should you follow for replacement on Chevrolet Corvette?
A: About every six months, with the vehicle raised and securely placed on jackstands, inspect the flexible hoses connecting the steel brake lines to the front and rear brake assemblies for cracks, chafing, leaks, blisters, and other damage, as these are crucial parts of the brake system requiring thorough examination with a light and mirror. If any defects are found, replace the hose with a new one. Begin by cleaning dirt from the hose ends, then use a flare-nut wrench to unscrew the tube nut to avoid rounding off the corners. Remove any bolts or clips securing the hose, and for front hoses, unscrew the brake line fitting while holding the fitting block with another wrench, pull the retaining clip to release the hose from the top bracket, and detach it from the caliper by unscrewing the banjo bolt. For rear hoses, hold the fitting block with pliers, remove the clip, and unscrew the banjo bolt to detach the hose. Disconnect the hose from the caliper, discarding the sealing washers, and attach the new brake hose using new sealing washers, tightening the banjo fitting bolt to the specified torque. Reverse the removal procedure to install the hose, ensuring it is not twisted, and check that suspension or steering components do not contact the hose by having an assistant push down on the vehicle and turn the steering wheel lock-to-lock during inspection. After installation, bleed the brake system. When replacing brake lines, use the correct parts, avoiding copper tubing, and purchase steel brake lines from a dealer or auto parts store. Prefabricated brake lines with flared tube ends and installed fittings are available and can be bent to the proper shapes using a tubing bender. Ensure the new line is well supported in brackets and has sufficient clearance from moving or hot components. After installation, check the master cylinder fluid level, add fluid as necessary, bleed the brake system, and carefully test the brakes before returning the vehicle to normal operation.