A: To remove the radiator, start by disconnecting the cable from the negative terminal of the battery. Then, drain the cooling system and remove the Fan Shroud, fan, and clutch. Next, raise the vehicle and support it securely on jackstands. Remove the lower radiator hose and, if applicable, detach the transmission cooler lines from the radiator. Lower the vehicle and remove the grille. Take out the radiator mount bracket and the condenser mounting bolts. Pull the condenser forward and remove the radiator. Before installing the radiator, replace any damaged radiator hoses and hose clamps. To install the radiator, ensure it seats properly in the lower saddles and that the upper brackets are secure. Install the transmission cooler line retaining clips onto the quick-connect fitting before installing the lines. Snap the cooler lines into place on the quick-connect fittings and reinstall the plastic collars to lock the retaining clip in place. Finally, refill the cooling system and check the automatic transmission fluid level.