How to check the Fan Clutch and Radiator fan from Chevrolet Colorado and GMC Canyon's cooling system?

The vehicles covered in this check are equipped with viscous fan clutches. For safety purposes, it is important to remove the key from the ignition switch. The check begins with a visual inspection, specifically inspecting the radiator fan blades for cracks or damage. Any fan that shows signs of either should be replaced. Next, wiggle the radiator fan blade from side to side and ensure that there is 1/4-inch or less play in the fan. If there is excessive play, the clutch should be replaced.

How do you remove Fan Clutch,Fan Shroud and Radiator fan for Chevrolet Colorado and GMC Canyon?

To remove the radiator fan from a vehicle's cooling system, start by partially draining the cooling system and removing the upper radiator hose. If the vehicle has a V8 engine, also remove the air filter housing. Next, unclip the air conditioning hoses from the fan shroud and remove the clips at the left and right junctures of the upper and lower fan shroud section. Pull the upper shroud from the clips at the side brackets. Finally, remove the fan clutch hub from the water pump by turning it counterclockwise. To install the fan, first unbolt it from the clutch if necessary and then tighten the fan-to-clutch bolts to the specified torque. Reverse the removal steps to complete the installation. Finally, check the coolant level and add more if needed to bring it to the appropriate level.

Genuine Chevrolet Colorado Fan Clutch

Cooling Fan Clutch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Fan Clutches found

View related parts
Chevrolet Colorado Clutch Assembly, Fan Blade
Part Number: 25948772
$121.15 MSRP: $254.52
You Save: $133.37 (53%)
ADD TO CART
Product Specifications
- Other Name: CLUTCH, Engine Air Cooling Fan; Fan Clutch
- Replaces: 15106619
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 5 Cyl 3.5L, 5 Cyl 3.7L
View related parts
Chevrolet Colorado Clutch Assembly, Fan Blade
Part Number: 84082862
$294.82 MSRP: $619.35
You Save: $324.53 (53%)
ADD TO CART
Product Specifications
- Other Name: Clutch, Fan Clutch
- Replaces: 23294307
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2021 Chevrolet Colorado | CREW CAB - 5'2" BOX, CREW CAB - 6'2" BOX, CREW CAB LS - 6'2" BOX, CREW CAB LT - 6'2" BOX, EXTENDED CAB - 6'2" BOX, LS CREW CAB - 5'2" BOX, LS EXTENDED CAB - 6'2" BOX, LT CREW CAB - 5'2" BOX, LT EXTENDED CAB - 6'2" BOX | 4 Cyl 2.8L Diesel
View related parts
Chevrolet Colorado Clutch Asm,Fan Blade
Part Number: 15106620
$123.11 MSRP: $258.64
You Save: $135.53 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CLUTCH, Engine Air Cooling Fan; Fan Clutch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 4 Cyl 2.8L, 4 Cyl 2.9L
View related parts
Chevrolet Colorado Clutch Asm,Fan Blade
Part Number: 25844696
Product Specifications
- Other Name: CLUTCH, Engine Air Cooling Fan; Fan Clutch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | CREW CAB, EXTENDED CAB, EXTENDED LENGTH, PICKUP | 8 Cyl 5.3L

Chevrolet Colorado Fan Clutch

The Fan Clutch in Chevrolet Colorado vehicles is an important part that controls the revolutions of the cooling fan to ensure that the engine does not overheat. Therefore by varying the speed of the fan depending on the engine temperature and speed the Fan Clutch assists in enhancing the rate of cooling. Usually installed on the water pump pulley and served by the engine crankshaft With numerous designs including, Viscous and electronically managed, Fan Clutches' kinds vary with respect to control and efficiency possibilities. Vehicles involving the use of rear-wheel drives like the Colorado commonly employ Fan Clutches and the front-wheel drive vehicles may go for electric cooling fans since they can easily be managed through electronic systems.

Each OEM Chevrolet Colorado Fan Clutch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Colorado Fan Clutch Parts Questions & Experts Answers

Clutch Assembly, Fan Blade
25948772
Q: How to check the Fan Clutch and Radiator fan from Chevrolet Colorado and GMC Canyon's cooling system?
A: The vehicles covered in this check are equipped with viscous fan clutches. For safety purposes, it is important to remove the key from the ignition switch. The check begins with a visual inspection, specifically inspecting the radiator fan blades for cracks or damage. Any fan that shows signs of either should be replaced. Next, wiggle the radiator fan blade from side to side and ensure that there is 1/4-inch or less play in the fan. If there is excessive play, the clutch should be replaced.
Clutch Asm,Fan Blade
25844696
Q: How do you remove Fan Clutch,Fan Shroud and Radiator fan for Chevrolet Colorado and GMC Canyon?
A: To remove the radiator fan from a vehicle's cooling system, start by partially draining the cooling system and removing the upper radiator hose. If the vehicle has a V8 engine, also remove the air filter housing. Next, unclip the air conditioning hoses from the fan shroud and remove the clips at the left and right junctures of the upper and lower fan shroud section. Pull the upper shroud from the clips at the side brackets. Finally, remove the fan clutch hub from the Water Pump by turning it counterclockwise. To install the fan, first unbolt it from the clutch if necessary and then tighten the fan-to-clutch bolts to the specified torque. Reverse the removal steps to complete the installation. Finally, check the coolant level and add more if needed to bring it to the appropriate level.