Where is the brake light switch located and how do you replace it on Chevrolet Cobalt,HHR and Saturn ION?

The brake light switch is at the top of the brake pedal bracket. To remove the switch, remove the insulator panel from below the knee bolster if equipped. Then, disconnect the electrical connector at the switch and rotate the switch counterclockwise while pulling to remove it. To install the new switch, rotate it clockwise while inserting it into the mounting bracket and connect the electrical connector. Finally, apply the brake pedal, release it, and verify that the brake lights turn off when the pedal is released.

How do you remove the Brake Light Switch for Chevrolet Cobalt,HHR and Saturn ION?

To remove the brake light switch, remove the insulation panel and the knee bolster and disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.

Genuine Chevrolet Cobalt Brake Light Switch

Brake Lamp Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Brake Light Switches found

View related parts
Chevrolet Cobalt Switch,Stop Lamp & Automatic Transmission Shift Lock & Cruise Control Release
Part Number: 12450036
$15.29 MSRP: $24.02
You Save: $8.73 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SWITCH, Stop Lamp Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt Sensor Assembly, Brake Pedal Position
Part Number: 20995840
$15.69 MSRP: $29.60
You Save: $13.91 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Clutch Switch, Position Sensor, Stoplamp Switch
- Replaces: 13348501, 92190131, 15223506, 25889337, 92220355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L
View related parts
Chevrolet Cobalt Sensor Assembly, Brake Pedal Position
Part Number: 13597428
$8.77 MSRP: $16.54
You Save: $7.77 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Brake; Clutch Switch, Stoplamp Switch
- Replaced by: 13549051
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | 2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR | 4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L

Chevrolet Cobalt Brake Light Switch

Chevrolet Cobalt brake light switch is a component that has the functions of ON the brake light for a vehicle to let other road users on the same road know that the car is slowing down, or coming to a stop. This mechanism is basic in addressing cases of road accidents in as much as those at the back of the vehicle are aware of the mannerism of the vehicle. Notwithstanding the variation that could be in terms of the type or kind of Brake Light Switch used on the various models of Cobalt, the function of the switch is same across the vehicle models.

Each OEM Chevrolet Cobalt Brake Light Switch we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Cobalt Brake Light Switch Parts Questions & Experts Answers

Sensor Assembly, Brake Pedal Position
20995840
Q: Where is the brake light switch located and how do you replace it on Chevrolet Cobalt,HHR and Saturn ION?
A: The brake light switch is at the top of the brake pedal bracket. To remove the switch, remove the insulator panel from below the knee bolster if equipped. Then, disconnect the electrical connector at the switch and rotate the switch counterclockwise while pulling to remove it. To install the new switch, rotate it clockwise while inserting it into the mounting bracket and connect the electrical connector. Finally, apply the brake pedal, release it, and verify that the brake lights turn off when the pedal is released.
Sensor Assembly, Brake Pedal Position
20995840
Q: How do you remove the Brake Light Switch for Chevrolet Cobalt,HHR and Saturn ION?
A: To remove the brake light switch, remove the insulation panel and the knee bolster and disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.