Make sure this part fits

GM 20995840 Sensor Assembly, Brake Pedal Position

2006-2016 GM

Customer Questions & Expert Answers (5)
GM 20995840 Sensor Assembly, Brake Pedal Position
  • Part Description
    SENSOR, Brake
  • Replaces
    13348501, 92190131, 15223506, 25889337, 92220355
  • Manufacturer
    General Motors
Make sure this part fits
$15.69 MSRP: $29.60
You Save: $13.91 (47%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number20995840
    Part DescriptionSENSOR, Brake
    Other NamesClutch Switch, Position Sensor, Stoplamp Switch
    Item Dimensions3.8 x 3.5 x 1.7 inches
    Item Weight0.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces13348501, 92190131, 15223506, 25889337, 92220355
    ManufacturerGeneral Motors
    SKU20995840
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2010-2011 Buick Allure4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2010-2011 Buick LaCrosse4 Cyl 2.4L, 6 Cyl 3.0L, 6 Cyl 3.6LCX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN, SPS 4 DOOR SEDAN
    2006-2011 Buick Lucerne6 Cyl 3.8L, 6 Cyl 3.9L, 6 Cyl 3.9L Flex, 8 Cyl 4.6LCX 4 DOOR, CXL, CXL 4 DOOR, CXS, V6 CX/CXL 4 DOOR, V8 CXL/SUPER 4 DOOR, V8 SUPER SERIES 4 DOOR
    2011-2015 Buick Regal4 Cyl 2.0L, 4 Cyl 2.4LCXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN
    2013-2015 Buick Verano4 Cyl 2.0L, 4 Cyl 2.4LCXL 4 DOOR NOTCHBACK
    2013-2016 Cadillac ATS4 Cyl 2.0L, 4 Cyl 2.5L, 6 Cyl 3.6L2 DOOR COUPE, 2 DOOR LUXURY COUPE, 2 DOOR PERFORMANCE COUPE, 3 DOOR PREMIUM COUPE, 4 DOOR LUXURY SEDAN, 4 DOOR PERFORMANCE SEDAN, 4 DOOR PREMIUM SEDAN, 4 DOOR SEDAN, V-SERIES 2 DOOR COUPE, V-SERIES 4 DOOR SEDAN
    2006-2011 Cadillac DTS8 Cyl 4.6L4 DOOR, FUNERAL COACH, LIMOUSINE
    2010-2011 Cadillac SRX6 Cyl 2.8L, 6 Cyl 3.0LCROSSOVER 4 DOOR
    2010-2016 Chevrolet Camaro4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L2 DOOR CONVERTIBLE, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 2LT, 2 DOOR COUPE, 2 DOOR COUPE 1LT, 2 DOOR COUPE 2LT, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE
    2008-2010 Chevrolet Cobalt4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.4L2 DOOR, 4 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 2 DOOR, LEVEL 4 PERFORMANCE/SC (SS) 4 DOOR, LEVEL ONE (LS) 2 DOOR, LEVEL ONE (LS) 4 DOOR, LEVEL THREE (SS) 2 DOOR, LEVEL THREE (SS) 4 DOOR, LEVEL TWO (LT) 2 DOOR, LEVEL TWO (LT) 4 DOOR
    View More
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 20995840 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the brake switch in Cadillac DeVille,DTS and Seville? Posted by Customer
    A:
    To remove the brake switch in vehicles from 2005 and earlier, start by removing the driver's side under-dash cover. Then, locate the switch at the top of the brake pedal bracket and twist it counterclockwise to remove it from the bracket. Disconnect the electrical connector from the switch. For installation, connect the electrical connectors to the switch and push the new switch into the clip until the switch plunger is fully depressed. Rotate the switch clockwise until it locks into position and no further adjustment is needed. Ensure that the brake lights are functioning properly. The rest of the installation process is the reverse of the removal. However, for vehicles from 2006 and later, a Brake Pedal Position (BPP) sensor is used, which requires a calibration procedure performed by a dealership service department or professional repair facility equipped for the necessary programming.
    Posted by GMPartsGiant Specialist
    Q:
    Where is the brake light switch located and how do you replace it on Chevrolet Cobalt,HHR and Saturn ION? Posted by Customer
    A:
    The brake light switch is at the top of the brake pedal bracket. To remove the switch, remove the insulator panel from below the knee bolster if equipped. Then, disconnect the electrical connector at the switch and rotate the switch counterclockwise while pulling to remove it. To install the new switch, rotate it clockwise while inserting it into the mounting bracket and connect the electrical connector. Finally, apply the brake pedal, release it, and verify that the brake lights turn off when the pedal is released.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the Brake Light Switch for Chevrolet Cobalt,HHR and Saturn ION? Posted by Customer
    A:
    To remove the brake light switch, remove the insulation panel and the knee bolster and disconnect the electrical connector at the switch. Remove the switch mounting fastener and remove the switch from the bracket. Install the switch to the bracket and tighten the switch mounting fastener securely.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after disconnecting the electrical connector of the 2011 Chevrolet Camaro? Posted by Customer
    A:
    The next step is to remove the mounting fastener and take out the sensor from the bracket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Brake Light Switch
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 20995840, the Right Choice

To ensure reliability, purchase GM part # 20995840 Sensor Assembly, Brake Pedal Position. It is sometimes referred to as GM Brake Light Switch. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Buick Allure, LaCrosse, Regal models. It fits Cadillac ATS, DTS, SRX. It also fits Chevrolet Camaro, Cobalt, Cruze. This also fits Pontiac G5, G8.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 20995840 Sensor Assembly, Brake Pedal Position. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Chevrolet parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly