Other Name: CYLINDER KIT, Brake Master Cylinder; Master Cylinder
Replaces: 22788972, 20965447, 92234612, 92242808
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2015 Chevrolet Camaro | LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L, 8 Cyl 7.0L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2020 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2021-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
A: To remove the brake master cylinder, disconnect the electrical connector from the brake fluid level switch and remove the nuts attaching the brake master cylinder to the power booster and carefully pull the brake master cylinder out of the engine compartment. To install the new brake master cylinder, bench bleed it first by attaching bleeder tubes to the outlet ports and filling the reservoir with brake fluid. Slowly push the pistons into the brake master cylinder to expel air, repeating until no more air bubbles are present. Remove the bleed tubes and install plugs in the open ports. Install a new seal into the groove of the brake master cylinder and then mount it over the studs on the power Brake Booster. Fill the reservoir with fluid and bleed the brake master cylinder and brake system.