Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2016-2022 Chevrolet Camaro | 2 DOOR CONVERTIBLE 1LS/1LT, 2 DOOR CONVERTIBLE 1LT, 2 DOOR CONVERTIBLE 1SS, 2 DOOR CONVERTIBLE 2LT, 2 DOOR CONVERTIBLE 2SS, 2 DOOR CONVERTIBLE HIGH PERFORMANCE, 2 DOOR COUPE 1LS/1LT, 2 DOOR COUPE 1LT, 2 DOOR COUPE 1SS, 2 DOOR COUPE 2LT, 2 DOOR COUPE 2SS, 2 DOOR COUPE HIGH PERFORMANCE | 4 Cyl 2.0L, 6 Cyl 3.6L, 8 Cyl 6.2L
Other Name: Booster Assembly, Power Brake (Vacuum) (Service); Booster Assembly, Brake Booster, Power Booster
Replaces: 92234618
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2010-2015 Chevrolet Camaro | 2 DOOR CONVERTIBLE, 2 DOOR COUPE, LS 2 DOOR COUPE, LT 2 DOOR CONVERTIBLE, LT 2 DOOR COUPE, SS 2 DOOR CONVERTIBLE, SS 2 DOOR COUPE | 6 Cyl 3.6L, 8 Cyl 6.2L
Q: How do I perform an operating check on the brake system and how to remove and install the brake booster?
A: To check the brake system, depress the brake pedal multiple times with the engine off to ensure there is no change in the pedal reserve distance. Then, depress the pedal and start the engine, checking if the pedal goes down slightly, indicating normal operation. Next, disconnect the electrical connector to the Brake Pedal Position (BPP) sensor, remove the booster pushrod retainer bolt and retaining clip, disconnect the pushrod from the brake pedal, and remove the cross brace and master cylinder if applicable. Disconnect the brake booster check valve and vacuum hose from the booster, then remove the brake booster mounting nuts from under the instrument pane, and to install the booster, position it on the firewall until the studs are visible.