How to install a new distributor cap and rotor when new spark plug wires are installed for Chevrolet C1500 and K1500?

When installing new spark plug wires, it is common practice to install a new distributor cap and rotor as well. The air cleaner assembly might need to be removed in order to access the distributor cap. Loosen all the mounting screws on the distributor cap and on some models it is held in place by clips that can be released by pressing down on them with a screwdriver and turning them about 1/2-turn or just one quarter of a turn for others. You can then lift up on the cap and remove it from the distributor while still leaving the wires attached. The rotor, which is located at the end of the distributor shaft, should be examined for signs of cracks, carbon tracks, corrosion or wear. Upon removal of the old rotor from its shaft, it can be replaced with a new one. It is indexed to fit only one way on its shaft. Carbon tracks and cracks are also among things people should look for when doing an inspection of this part. While checking the inside of this part, closely examine terminals for presence of excessive corrosion or damage. Replace if uncertain as to whether cap is still good. One by one move these wires over onto each corresponding new position in case you need to change your vehicle's cap when wires are being relocated into correct positions so as not to lose track of where they belong within the firing order sequence . Lastly it should be reattached onto distributor where either screws are tightened or latches are repositioned that hold it in place.

Genuine Chevrolet C1500 Distributor Cap

Ignition Distributor Cap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Distributor Caps found

View related parts
Chevrolet C1500 Cap,Distributor
Part Number: 19166099
$33.07 MSRP: $62.40
You Save: $29.33 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CAP, Distributor; Cap, Distributor Cap
- Replaces: 10475118, 10477841
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1995 Chevrolet C1500 | C1500 EXTENDED CAB LONG BOX, C1500 EXTENDED CAB STANDARD BOX, C1500 REGULAR CAB LONG BOX, C1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4L
View related parts
Chevrolet C1500 Cap,Distributor
Part Number: 10452459
$50.52 MSRP: $90.62
You Save: $40.10 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CAP, Distributor; Cap, Distributor Cap
- Replaces: 10493663, 10477599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet C1500 | C1500 EXTENDED CAB LONG BOX, C1500 EXTENDED CAB STANDARD BOX, C1500 REGULAR CAB LONG BOX, C1500 REGULAR CAB STANDARD BOX | 8 Cyl 5.0L, 8 Cyl 5.7L
View related parts
Chevrolet C1500 Cap,Distributor
Part Number: 10452458
$37.91 MSRP: $68.00
You Save: $30.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: CAP, Distributor; Cap, Distributor Cap
- Replaces: 10477311, 10493577
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chevrolet C1500 | C1500 EXTENDED CAB LONG BOX, C1500 EXTENDED CAB STANDARD BOX, C1500 REGULAR CAB LONG BOX, C1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L
View related parts
Chevrolet C1500 Cap,Distributor
Part Number: 10477182
$15.19 MSRP: $28.66
You Save: $13.47 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: CAP, Distributor; Cap, Distributor Cap
- Replaces: 01989797, 1989797, 10476273
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1995 Chevrolet C1500 | C1500 EXTENDED CAB LONG BOX, C1500 EXTENDED CAB STANDARD BOX, C1500 REGULAR CAB LONG BOX, C1500 REGULAR CAB STANDARD BOX | 6 Cyl 4.3L, 8 Cyl 5.0L, 8 Cyl 5.7L, 8 Cyl 6.2L Diesel, 8 Cyl 7.4L

Chevrolet C1500 Distributor Cap

Distributor Cap of Chevrolet C1500 vehicles is a core genuine thatmajorly affects the ignition system of the car, by transferring current from the ignition coil to the spark plug wires. This component acts as a shield to other inside parts of the distributor and holds the rotor which is charged with the task of supplying high voltage electric current to the spark plugs in the right sequence. The distributor cap has terminal towers for each of the engine cylinders with such differences as the dual spark plug or the wasted spark. One should often tend to checking or changing the distributor cap because some signs of a bad cap are frequent shaking, stalling, backfiring and hard cranking. Also, water causes some failure on the engine thus needs a proper cleaning of the distributor and ensure that there is a gasket or an O-ring that give a tight seal. In summary, the distributor cap is one of the important and easy-to-check/replace components of the Chevrolet C1500's engine ignition system.

Each OEM Chevrolet C1500 Distributor Cap we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet C1500 Distributor Cap Parts Questions & Experts Answers

Cap,Distributor
10452458
Q: How to install a new distributor cap and rotor when new spark plug wires are installed for Chevrolet C1500 and K1500?
A: When installing new Spark Plug Wires, it is common practice to install a new distributor cap and rotor as well. The air cleaner assembly might need to be removed in order to access the distributor cap. Loosen all the mounting screws on the distributor cap and on some models it is held in place by clips that can be released by pressing down on them with a screwdriver and turning them about 1/2-turn or just one quarter of a turn for others. You can then lift up on the cap and remove it from the distributor while still leaving the wires attached. The rotor, which is located at the end of the distributor shaft, should be examined for signs of cracks, carbon tracks, corrosion or wear. Upon removal of the old rotor from its shaft, it can be replaced with a new one. It is indexed to fit only one way on its shaft. Carbon tracks and cracks are also among things people should look for when doing an inspection of this part. While checking the inside of this part, closely examine terminals for presence of excessive corrosion or damage. Replace if uncertain as to whether cap is still good. One by one move these wires over onto each corresponding new position in case you need to change your vehicle's cap when wires are being relocated into correct positions so as not to lose track of where they belong within the firing order sequence . Lastly it should be reattached onto distributor where either screws are tightened or latches are repositioned that hold it in place.