How to remove and install a front hub assembly on Chevrolet Avalanche?

First, remove the front wheel lug nuts and raise the vehicle on jackstands to remove the hub assembly. Remove the tire and on a 4WD model, take off the hub cover and use a socket combined with large breaker bar to unscrew off driveaxle/hub nut. Brake disc as well as wheel speed sensor should be pulled out of the hub after that remove the hub retaining bolts from steering knuckle as well as disc shield. In case it is necessary tap out of side to side then pull out of steering knuckle. Before fitting a new hub assembly, clean mating surfaces at steering knuckle, bearing flange and knuckle bore. Afterward fit bearing assembly into steering knuckle (or onto drive-axle for 4WD models). Put brake disc, caliper mounting bracket, caliper and wheel speed sensor back in place (for 4WD models). Reinstall driveaxle/hub nut torquing it to specifications. Lastly put back wheel on jack stands finally tighten lug nuts to specifications while lowering vehicle.

Genuine Chevrolet Avalanche Wheel Hub

Wheel Axle Hub

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Wheel Hubs found

View related parts
Chevrolet Avalanche Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
Part Number: 84856654
$232.38 MSRP: $461.06
You Save: $228.68 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub & Bearing
- Position: Front
- Replaces: 10393171, 84356643, 22841381, 25918329, 25976819
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L
View related parts
Chevrolet Avalanche Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
Part Number: 84856655
$222.17 MSRP: $440.82
You Save: $218.65 (50%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub & Bearing
- Position: Front
- Replaces: 10393163, 19209040, 15102294, 15863441, 84356639
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Avalanche Rear Wheel Bearing
Part Number: 25843093
$158.68 MSRP: $484.38
You Save: $325.70 (68%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Wheel ; Hub, Rear Wheel; Hub
- Position: Rear
- Replaces: 15712805, 15829645
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 3/4 TON | 8 Cyl 8.1L
View related parts
Chevrolet Avalanche HUB ASM,FRT WHL (W/ BRG & WHL SPD SEN)
Part Number: 19419501
$311.66 MSRP: $703.62
You Save: $391.96 (56%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub, Hub & Bearing
- Replaces: 15104582, 15946732, 89059057, 89059056, 89059059, 15225751, 15225750, 15104907, 15064670, 15225770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 3/4 TON | 8 Cyl 8.1L
View related parts
Chevrolet Avalanche HUB ASM,FRT WHL (W/ WHL SPD SEN) <SEE GUIDE/BFO>
Part Number: 19419365
$154.59 MSRP: $281.08
You Save: $126.49 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub, Hub & Bearing
- Replaces: 15052444, 15233112, 19370702
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex
View related parts
Chevrolet Avalanche Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
Part Number: 84856653
$233.63 MSRP: $463.56
You Save: $229.93 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Hub, Hub & Bearing
- Position: Front
- Replaces: 10393170, 20883242, 84356642, 25819677, 22841380
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Chevrolet Avalanche | 1/2 TON | 8 Cyl 5.3L, 8 Cyl 5.3L Flex, 8 Cyl 6.0L

Chevrolet Avalanche Wheel Hub

The Wheel Hub models for Chevrolet Avalanche vehicles is a vital part of the car's wheel system responsible for joining the wheel to the car as well as consisting of bearings, sensors, and the brake parts. The configurations of Wheel Hub and bearing assemblies are several including the unit assembly, which usually has ABS sensors incorporated in it. Bearing can be loose or damaged and result to noises, vibration and in extreme cases, wheel loss, thus the need to check and replace when required. The Wheel Hub must be properly installed so as to prevent mechanical failures by firmly fixing the wheel to rotate as it should and firmly attached to the vehicle. This makes the Wheel Hub assemblies among the critical components in the current automotive design in relation to safety and durability as illustrated by the many vehicles that have adopted the SKF Wheel hub bearings.

Each OEM Chevrolet Avalanche Wheel Hub we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Chevrolet Avalanche Wheel Hub Parts Questions & Experts Answers

Hub Assembly, Front Whl (W/ Brg & Whl Spd Sen)
84856653
Q: How to remove and install a front hub assembly on Chevrolet Avalanche?
A: First, remove the front wheel lug nuts and raise the vehicle on jackstands to remove the hub assembly. Remove the tire and on a 4WD model, take off the hub cover and use a socket combined with large breaker bar to unscrew off driveaxle/hub nut. Brake disc as well as wheel speed sensor should be pulled out of the hub after that remove the hub retaining bolts from Steering Knuckle as well as disc shield. In case it is necessary tap out of side to side then pull out of steering knuckle. Before fitting a new hub assembly, clean mating surfaces at steering knuckle, bearing flange and knuckle bore. Afterward fit bearing assembly into steering knuckle (or onto drive-axle for 4WD models). Put brake disc, caliper mounting bracket, caliper and wheel speed sensor back in place (for 4WD models). Reinstall driveaxle/hub nut torquing it to specifications. Lastly put back wheel on jack stands finally tighten lug nuts to specifications while lowering vehicle.