My Garage
My Account
Cart
Genuine Chevrolet Avalanche Shift Fork
Transmission Shift Fork- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
15 Shift Forks found
Chevrolet Avalanche Fork Asm,Transfer Case High/Low Shift
Part Number: 19133031$84.72 MSRP: $147.48You Save: $62.76 (43%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork Asm,Complete Mode
Part Number: 12473219$102.98 MSRP: $162.03You Save: $59.05 (37%)Ships in 1-3 Business Days
Chevrolet Avalanche Fork Asm,1st & 2nd Shift
Part Number: 88958968$16.20 MSRP: $21.05You Save: $4.85 (24%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork Asm,3rd & 4Th Shift
Part Number: 88958970$24.61 MSRP: $31.99You Save: $7.38 (24%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork Asm,Transfer Case High/Low Shift
Part Number: 12544310$68.79 MSRP: $96.55You Save: $27.76 (29%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork,5Th & Rev Shift
Part Number: 88958971$19.87 MSRP: $25.83You Save: $5.96 (24%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork,4Th & 5Th Shift
Part Number: 88984401$10.58 MSRP: $13.75You Save: $3.17 (24%)Ships in 1-2 Business Days
Chevrolet Avalanche Fork Asm,Transfer Case High/Low Shift
Part Number: 12384964$131.39 MSRP: $207.67You Save: $76.28 (37%)
Chevrolet Avalanche Shift Fork
Each OEM Chevrolet Avalanche Shift Fork we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Chevrolet Avalanche Shift Fork Parts Questions & Experts Answers
- Q: How do you remove and install right Axle Shaft,Shift Fork and Wheel Bearing on 4WD and AWD Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL?A: To remove and install components in the front Differential of selectable 4WD systems, first, loosen the wheel lug nuts and raise the vehicle securely on jackstands. Remove the right front wheel and the differential carrier splash shield if equipped. Drain the lubricant from the front differential. For 4WD systems, unbolt the right driveaxle from the axleshaft flange and support it out of the way. Remove the front axle shift motor and, if applicable, disconnect the front stabilizer link or remove the front shock absorber/coil spring assembly. On 2500/3500 models, remove the front axle bracket bolts and slide the bracket forward for additional clearance. Support the differential carrier with a floor jack and block of wood. Remove the bolts securing the axle tube to the differential carrier and the nuts attaching the tube to its support bracket. Carefully remove the output shaft tube, ensuring no components fall out. Mount the tube in a vise and remove the internal components. Measure and remove the axleshaft bearing using a slide hammer and bearing remover attachment. For installation, install the bearing to the original depth using a bearing driver or socket, then install a new seal and deflector, lubricating the seal lips with grease. Carefully drive in the axleshaft, followed by the internal components. Apply RTV sealant to the tube-to-differential housing mating surface, and install the tube assembly, tightening bolts and nuts to specified torques. Reinstall the driveaxle, front axle shift motor, and fill the differential with lubricant. For AWD systems, remove the stabilizer bar link and, if applicable, the front shock absorber. Unbolt the right driveaxle from the axleshaft flange, supporting it properly. Support the differential carrier with a floor jack and a block of wood. Remove nuts attaching the axle shaft to its support bracket and the bolts securing the axle shaft flange to the differential carrier. Use a brass punch and hammer to separate the axle shaft from the differential case side gear. Remove the inner axle shaft assembly and axle shaft. Replace the inner seal and bearing with a special tool, then apply RTV sealant to the differential sealing surface and install the inner axle shaft housing assembly. Install the axle shaft to the support bracket and align the splines with the differential side gear. Tap the axle shaft with a mallet until the ring (clip) aligns with the groove in the differential case side gear. Install the axle shaft to the inner flange and tighten the bolts. Reinstall the stabilizer link, fill the differential with lubricant, install the differential carrier splash shield, and finally, install the wheel and lug nuts. Lower the vehicle, tighten the lug nuts, and check for proper operation.
