How do you remove the Water Pump for Cadillac Escalade?

To remove the 4.3L V6, 5.3L, and 6.2L V8 engines, start by disconnecting the cable from the negative terminal of the battery. Then, drain the coolant and remove the air intake duct and resonator assembly. Next, remove the drivebelt and center the water pump pulley holes over the water pump mounting bolts. Remove the water pump and gasket from the coolant manifold, and clean the mounting surface on the engine and water pump. Clean the mounting bolt threads and threaded holes if necessary. Compare the replacement pump with the old one to ensure they're identical. Place the gaskets and water pump into position, and tighten the bolts to the torque specification. The remaining installation steps are the reverse of the removal procedure. Refill the engine with coolant, run the engine, and check for leaks. For the 6.0L V8 removal, follow similar steps, but also remove the fan, fan clutch, water pump inlet hose, water pump outlet hose, and coolant air bleed hose if necessary. Remove the thermostat housing if a new water pump is to be installed. Unbolt the water pump, clean the mounting surface, compare the replacement pump, and install the gaskets and water pump. Tighten the bolts, complete the remaining installation steps, refill the engine with coolant, run the engine, and check for leaks.

Genuine Cadillac Escalade Water Pump

H2O Pump

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Water Pumps found

View related parts
Cadillac Escalade Pump Kit, Wat
Part Number: 12703898
$176.13 MSRP: $349.50
You Save: $173.37 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Water Pump
- Replaces: 19256261, 12686763, 12681184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | 1/2 TON, 3/4 TON, EXT 1/2 TON, EXT 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.3L, 8 Cyl 6.0L
View related parts
Cadillac Escalade Water Pump Assembly (W/ Manifold)
Part Number: 12685257
$276.05 MSRP: $547.72
You Save: $271.67 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Water (W/ Manifold); Water Pump, Water Pump Assembly
- Replaces: 12671394, 12681258, 12674640
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | 1/2 TON, 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 1500 CREW CAB, 1500 CREW CAB STANDARD BOX, 4 DOOR 1/2 TON, CLASSIC 1500 CREW CAB LONG BOX, CLASSIC 1500 EXTENDED CAB STANDARD BOX | 8 Cyl 6.2L
View related parts
Cadillac Escalade Water Pump Kit
Part Number: 12692045
$112.85 MSRP: $223.92
You Save: $111.07 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump
- Replaces: 12683012
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | 1/2 TON, 1500 4 DOOR, 1500 4 DOOR SUV, 1500 4 DOOR UTILITY, 4 DOOR 1/2 TON | 8 Cyl 6.2L
View related parts
Cadillac Escalade Engine Coolant Pump Kit
Part Number: 89060527
$216.27 MSRP: $429.11
You Save: $212.84 (50%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit,Water; Water Pump, Water Pump Assembly
- Replaces: 12532528, 89017748, 12528917
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | 1 TON CREW CAB, 1/2 TON, 3/4 TON, 4 DOOR 1/2 TON, CLASSIC 4 DOOR 1/2 TON, CREW CAB 1 TON, EXTENDED CAB 1 TON, EXTENDED CAB 6'6" BOX 1/2 TON, EXTENDED CAB 6'6" BOX 3/4 TON, EXTENDED CAB 8' BOX 3/4 TON, K2500 CREW CAB, K3500 CAB CHASSIS 135.5, K3500 CAB CHASSIS 159.9, REGULAR CAB 1 TON, REGULAR CAB 3/4 TON, YUKON/DENALI/ESCALADE | 8 Cyl 5.7L
View related parts
Cadillac Escalade Water Pump Assembly
Part Number: 19168888
$217.15 MSRP: $430.81
You Save: $213.66 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Asm,Water ; Pump, Engine Coolant; Water Pump
- Replaces: 97216136
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade | 3/4 TON, EXT 3/4 TON
View related parts
Cadillac Escalade Water Pump Kit
Part Number: 12681417
$290.63 MSRP: $523.66
You Save: $233.03 (45%)
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Water; Water Pump
- Replaced by: 19434033
- Replaces: 19208815
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | 1/2 TON, EXT 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex, 8 Cyl 6.2L, 8 Cyl 6.2L Flex
View related parts
Cadillac Escalade Water Pump Assembly
Part Number: 12687631
$191.11 MSRP: $360.58
You Save: $169.47 (47%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Wat; Water Pump
- Replaced by: 12724892
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 8 Cyl 6.2L
View related parts
Cadillac Escalade Auxiliary Water Pump Assembly
Part Number: 13507539
$76.20 MSRP: $136.68
You Save: $60.48 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Aux Wat
- Replaced by: 13551855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel
View related parts
Cadillac Escalade Generator Control Module Coolant Pump
Part Number: 25880378
$190.29 MSRP: $342.86
You Save: $152.57 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Generator Control Module Coolant ; Pump, Engine Coolant; Pump Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
Cadillac Escalade Water Pump Kit
Part Number: 12693373
Product Specifications
- Other Name: Pump Kit, Wat; Water Pump
- Replaces: 89017771, 89017693, 88893906
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Cadillac Escalade | 3/4 TON, EXT 3/4 TON
View related parts
Cadillac Escalade Generator Control Module Coolant Pump
Part Number: 15293032
$176.92 MSRP: $318.78
You Save: $141.86 (45%)
Product Specifications
- Other Name: Pump Assembly, Generator Control Module Coolant ; Pump, Engine Coolant; Pump, Water Pump
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | YUKON/DENALI/ESCALADE | 8 Cyl 6.0L, 8 Cyl 6.0L Flex
View related parts
Cadillac Escalade Pump Kit, Wat
Part Number: 12713806
$71.78 MSRP: $128.76
You Save: $56.98 (45%)
Product Specifications
- Other Name: Water Pump
- Replaced by: 12716504
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade | 1/2 TON, YUKON XL/DENALI XL/ESCALADE ESV, YUKON/DENALI/ESCALADE | 6 Cyl 3.0L Diesel

Cadillac Escalade Water Pump Parts Questions & Experts Answers

Water Pump Kit
12681417
Q: How do you remove the Water Pump for Cadillac Escalade?
A: To remove the 4.3L V6, 5.3L, and 6.2L V8 engines, start by disconnecting the cable from the negative terminal of the battery. Then, drain the coolant and remove the air intake duct and resonator assembly. Next, remove the drivebelt and center the water pump pulley holes over the water pump mounting bolts. Remove the water pump and gasket from the coolant manifold, and clean the mounting surface on the engine and water pump. Clean the mounting bolt threads and threaded holes if necessary. Compare the replacement pump with the old one to ensure they're identical. Place the gaskets and water pump into position, and tighten the bolts to the torque specification. The remaining installation steps are the reverse of the removal procedure. Refill the engine with coolant, run the engine, and check for leaks. For the 6.0L V8 removal, follow similar steps, but also remove the fan, Fan Clutch, water pump inlet hose, water pump outlet hose, and coolant air bleed hose if necessary. Remove the thermostat housing if a new water pump is to be installed. Unbolt the water pump, clean the mounting surface, compare the replacement pump, and install the gaskets and water pump. Tighten the bolts, complete the remaining installation steps, refill the engine with coolant, run the engine, and check for leaks.