Where is the MAP sensor located and how do you remove it for Cadillac DeVille and DTS?

The MAP sensor is placed on the top of the intake manifold close to the throttle body. It is specifically on top of the throttle body. It can be disconnected by unplugging electrical connector and removing bolts that hold an accelerator cable bracket from a throttle body, and pulling it off a throttle body. The negative battery terminal cables must be disconnected before you begin. Thereafter, disconnect MAP sensor connector. Then, remove accelerator cable bracket bolts and lift up the bracket. At last, take out MAP sensor from the throttle body. Installation is just the reverse order of this process for removal.

Genuine Cadillac Deville MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 MAP Sensors found

View related parts
Cadillac Deville Sensor,Map
Part Number: 12569240
$65.02 MSRP: $122.71
You Save: $57.69 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors
- Replaces: 16137039, 16254719
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985 Cadillac Deville | 2 DOOR, 4 DOOR, BROUGHAM 2 DOOR FWD, BROUGHAM 4 DOOR FWD, FUNERAL COACH, LIMOUSINE 4 DOOR, LIMOUSINE 4 DOOR CTR PART | 6 Cyl 4.3L Diesel
View related parts
Cadillac Deville Sensor Assembly, Map
Part Number: 12614973
$72.39 MSRP: $143.62
You Save: $71.23 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors; Map Sensor
- Replaced by: 19418808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Cadillac Deville | 4 DOOR, DEVILLE, FUNERAL COACH, HIGH LUXURY, LIMOUSINE, SEVILLE, SLS, STS, TOURING 4 DOOR, TOURING SEDAN | 8 Cyl 4.6L
View related parts
Cadillac Deville Sensor Asm,Map
Part Number: 12219931
$47.97 MSRP: $154.32
You Save: $106.35 (69%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SENSOR, Computer Control Sensors
- Replaces: 16006835, 16006833
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1995 Cadillac Deville | 2 DOOR, 4 DOOR, 60 SPECIAL 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 2 DOOR FWD, BROUGHAM 4 DOOR, BROUGHAM 4 DOOR FWD, CONVERSION, FORMAL LIMOUSINE, FUNERAL COACH, LIMOUSINE, LIMOUSINE 4 DOOR, LIMOUSINE 4 DOOR CTR PART, TOURING 4 DOOR | 6 Cyl 4.1L, 8 Cyl 4.1L, 8 Cyl 4.5L, 8 Cyl 4.9L, 8 Cyl 5.7L Diesel
View related parts
Cadillac Deville Sensor Assembly, Manifold Differential Pressure
Part Number: 16231141
$31.90 MSRP: $102.62
You Save: $70.72 (69%)
ADD TO CART
Product Specifications
- Other Name: SENSOR
- Replaces: 16006834, 16054920
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Cadillac Deville | 4 DOOR | 8 Cyl 4.6L
View related parts
Cadillac Deville Sensor Asm,Map
Part Number: 88963180
Product Specifications
- Other Name: SENSOR, Computer Control Sensors; Manifold Absolute Pressure Sensor, Map Sensor
- Replaces: 88959507, 16151999, 12490588
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Cadillac Deville | 4 DOOR | 8 Cyl 4.6L

Cadillac Deville MAP Sensor Parts Questions & Experts Answers

Sensor Assembly, Map
12614973
Q: Where is the MAP sensor located and how do you remove it for Cadillac DeVille and DTS?
A: The MAP sensor is placed on the top of the intake manifold close to the throttle body. It is specifically on top of the throttle body. It can be disconnected by unplugging electrical connector and removing bolts that hold an accelerator cable bracket from a throttle body, and pulling it off a throttle body. The negative battery terminal cables must be disconnected before you begin. Thereafter, disconnect MAP sensor connector. Then, remove accelerator cable bracket bolts and lift up the bracket. At last, take out MAP sensor from the throttle body. Installation is just the reverse order of this process for removal.