My Garage
My Account
Cart
Genuine Cadillac CTS Door Lock Cylinder
Door Lock Cylinder Tumbler- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
9 Door Lock Cylinders found
Cadillac CTS Front Side Door Lock Cylinder Kit (Uncoded)
Part Number: 13590041$67.65 MSRP: $106.39You Save: $38.74 (37%)
Cadillac CTS Cylinder Kit,Front Side Door Lock(Uncoded)
Part Number: 20766969$59.10 MSRP: $88.35You Save: $29.25 (34%)
Cadillac CTS Front Side Door Lock Cylinder Kit (Uncoded)
Part Number: 13590042$56.25 MSRP: $85.25You Save: $29.00 (35%)Ships in 1-2 Business Days
Cadillac CTS Cylinder Kit, Front Side Door Lock (Uncoded)
Part Number: 15825364$145.83 MSRP: $219.01You Save: $73.18 (34%)Ships in 1-3 Business Days
Cadillac CTS Cylinder Kit, Front Side Door Lock (Uncoded)
Part Number: 20766970$19.64 MSRP: $29.36You Save: $9.72 (34%)Ships in 1-3 Business Days
Cadillac CTS Cylinder Kit, Rear Compartment Lid Lock (W/ Key)
Part Number: 22821172$100.63 MSRP: $150.45You Save: $49.82 (34%)Cadillac CTS Cylinder Kit,Rear Compartment Lid Lock (W/ Key)
Part Number: 20789740$133.68 MSRP: $200.76You Save: $67.08 (34%)
Cadillac CTS Door Lock Cylinder
Door Lock Cylinder is an important part installed in Cadillac CTS cars and it is situated in the front door that helps to lock and unlock the fronts door with the car key. This mechanism also ensures that the pedestrian has an easy time accessing the interior of the vehicle while at the same time protecting the vehicle from instance access by any unauthorized person. Particularly over years of operation, the Cadillac CTS Door Lock Cylinder may prove challenging in its functionality so as to lock or unlock the doors as was intended, and at the same time making the key stuck. Like most of the car models that are produced today, Cadillac CTS retains this basic component where most car makers have shifted to new door lock cylinders. To ensure that Door Lock Cylinder works on optimally and also provide security, it essential to repair and replace it on regular basis. It is therefore important for one to keep an eye open for of signs that would indicate that the car is worn out so that proper action is can be taken to ensure that the Cadillac CTS is easily accessible and secure.
Each OEM Cadillac CTS Door Lock Cylinder we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.
Cadillac CTS Door Lock Cylinder Parts Questions & Experts Answers
- Q: How do you remove and install the door handle,Door Latch Assembly and Door Lock Cylinder on Cadillac CTS?A: For 2007 and earlier models, start by raising the window fully, then remove the door trim panel and watershield. Next, take out the anti-theft shield fasteners from the door jamb, remove the push-pin for the door handle fastener, and take out the shield if present. Pry open the plastic clip for the lock cylinder rod-to-door latch and handle rod, disconnect the rods from the latch assembly, and then remove the watershield and door handle nuts to take out the handle and rods from outside the door, with installation being the reverse of removal. For 2008 and later models, this procedure pertains only to the outside door handle lever; if replacing the handle reinforcement and lock, remove it along with the door latch as a single assembly. Start by removing the trim cap for the outside handle retaining screw and the screw itself, then take off the watershield and the cover from the outside handle. To remove the handle, pull it out of the door and to the rear to disengage it from the handle reinforcement, and inspect the outside door handle seals for any damage, replacing them if necessary, with installation being the reverse of removal. For the inside door handle on 2007 and earlier models, remove the door trim panel, then the retaining bolt to detach the handle assembly, disconnect the actuator rod, and remove the handle, with installation being the reverse of removal. For 2008 and later models, remove the door trim panel, disconnect the actuator cable from the inside door handle, and then remove the handle from the door panel, with installation being the reverse of removal. For the door latch or outside door handle reinforcement on 2008 and later models, first remove the outside door handle lever, then the door trim panel. Remove the trim cap for the outside door handle reinforcement retaining screw and the screw itself, followed by the exterior retaining screw for the reinforcement. Take out the latch mounting fasteners, pull out the latch and rods as a single assembly, disconnect the rods and electrical connector from the latch, and disconnect the inside door handle actuator cable. Place the latch and outside door handle reinforcement on a clean workbench, disconnect the actuator rods from the latch or outside door handle reinforcement, and installation is the reverse of removal. For the door lock cylinder, on 2007 and earlier models, remove the door latch and outside door handle, while for 2008 and later models, remove the door latch and outside door handle reinforcement. Then, remove the E-clip and rod arm from the lock cylinder, press the release button, and take out the lock cylinder. When installing, push the lock cylinder all the way into the outside door handle reinforcement until it clicks into place, with installation otherwise being the reverse of removal.
Related Cadillac CTS Parts
Browse by Year
2019 Door Lock Cylinder 2018 Door Lock Cylinder 2017 Door Lock Cylinder 2016 Door Lock Cylinder 2015 Door Lock Cylinder 2014 Door Lock Cylinder 2013 Door Lock Cylinder 2012 Door Lock Cylinder 2011 Door Lock Cylinder 2010 Door Lock Cylinder 2009 Door Lock Cylinder 2008 Door Lock Cylinder 2007 Door Lock Cylinder 2006 Door Lock Cylinder 2005 Door Lock Cylinder 2004 Door Lock Cylinder 2003 Door Lock Cylinder