How to Remove, Install and Service rear Drive Axles,Wheel Bearing and Wheel Seal on Buick Regal?

These cars utilize two types of drive axles, namely the C-lock and the non C-lock type whereby the difference depends on the structure of the locking system. In the C-lock type the shafts are locked by C-shaped locks that fit into slots at the inner end of the shaft while in the non C-lock type they are locked by a backing bracket plate fixed on the axle housing. The bearings used in the case of the C-lock axle comprise an outer race, bearing rollers, and roller bearing cage with snaprings while the bearings used in the case of the non C-lock axle is a unit roller bearing which is pressed on the shaft up to the shoulder. Pre-service, it is necessary to determine the axle type and the axle identification number is located on the front side of the passenger side axle tube adjacent to the differential carrier, but not for models which used 8½ in. ring gear, which have the ID on a tag under one of the differential rear cover bolts. For the non C-lock type the process starts by removing the bearing retainer plate by pounding it using chisel and the axle shaft end play check that should not be more than 0.022 in. (5mm). The removal procedures involve the detachment of the wheel, tire, and brake drum as well as the separation of the brake line, the use of the slide hammer to pull out the axle shaft and bearing assembly. The bearing retainer is then machined in several places so that it can be removed; the new bearing is then fitted and all the parts put back. For the C-lock type: The procedure is initiated by loosening and thereafter unscrewing the lockbolt and rod upon the differential; by withdrawal of the differential cover and by the unscrewing of the pinion shaft lockscrew. The axle shaft is pushed towards the center of the vehicle in order to get rid of the C-lock, always being careful not to scrap the oil seal during the extraction process. During installation, a bearing puller is applied, the new bearing is lubricated, and correct positioning of the axle shaft and C-lock must be reached in reassembling the differential and then the axle is filled with lubricant. Last of all, brake drum and wheels are reinstated and a check is made for the leaks with the help of road test.

Genuine Buick Regal Wheel Seal

Wheel Axle Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

25 Wheel Seals found

View related parts
Buick Regal Seal Kit, Front Wheel Drive Shaft
Part Number: 24288436
$18.46 MSRP: $27.55
You Save: $9.09 (33%)
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Whl Drv Shf; Axle Seal, Output Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal Assembly, Rear Axle Shaft
Part Number: 23206451
$21.36 MSRP: $42.38
You Save: $21.02 (50%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal, Pinion Seal, Seal
- Position: Rear
- Replaces: 23206450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON | 4 Cyl 2.0L, 6 Cyl 3.6L
View related parts
Buick Regal Seal,Front Wheel Drive Shaft Rear Oil
Part Number: 93183567
$13.19 MSRP: $22.97
You Save: $9.78 (43%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Steering Knuckle
- Position: Front and Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SL 4 DOOR STATION WAGON, BASE 4 DOOR HATCHBACK, BASE 4 DOOR STATION WAGON | 4 Cyl 2.0L
- 2011-2013 Buick Regal | CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal Assembly, Front Wheel Inner Bearing
Part Number: 3965092
$6.01 MSRP: $11.35
You Save: $5.34 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Bearing
- Position: Front Inner
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Buick Regal Seal,Rear Wheel Bearing
Part Number: 554631
$10.97 MSRP: $20.71
You Save: $9.74 (48%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Buick Regal Seal, Front Wheel Drive Intermediate Shaft (O, Ring)
Part Number: 22759189
$12.60 MSRP: $17.78
You Save: $5.18 (30%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft; Intermed Shaft Seal, Intermediate Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal Kit, Front Wheel Drive Shaft
Part Number: 24288437
$18.41 MSRP: $30.48
You Save: $12.07 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal Kit, Front Whl Drv Shf; Axle Seal, Output Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal Kit,Front Wheel Drive Shaft
Part Number: 19258265
$16.01 MSRP: $26.49
You Save: $10.48 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Front Wheel Drive Axle Shaft
- Position: Front
- Replaces: 24234254, 19256354
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L
View related parts
Buick Regal Seal Kit,Front Wheel Drive Shaft
Part Number: 24202835
$7.59 MSRP: $12.57
You Save: $4.98 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Front Wheel Drive Axle Shaft; Axle Seal, Seal, Seal Kit
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-2004 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, GL, GLX, GRAN SPORT 2 DOOR, GRAN SPORT 4 DOOR, GS, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR, LS, REGAL | 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Seal,Propeller Shaft Front Slip Yoke Oil
Part Number: 8673526
$6.53 MSRP: $10.80
You Save: $4.27 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SEAL, Transmission Rear Main Bearing; Extension Housing Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1982-1987 Buick Regal | 2 DOOR, 4 DOOR, REGAL, STATION WAGON | 6 Cyl 3.8L, 6 Cyl 4.1L, 6 Cyl 4.3L Diesel, 8 Cyl 5.0L, 8 Cyl 5.7L Diesel
View related parts
Buick Regal Seal,Rear Axle Shaft
Part Number: 22845699
$14.44 MSRP: $27.24
You Save: $12.80 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Rear Axle Shaft Bearing or Hub; Axle Seal, Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L
View related parts
Buick Regal Seal Kit,Front Wheel Drive Shaft
Part Number: 19259386
$13.98 MSRP: $23.14
You Save: $9.16 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Front Wheel Drive Axle Shaft; Axle Seal
- Position: Front
- Replaced by: 19353826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2015 Buick Regal | CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal Kit,Front Wheel Drive Shaft
Part Number: 19258266
$12.43 MSRP: $20.57
You Save: $8.14 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL KIT, Front Wheel Drive Axle Shaft; Axle Seal
- Position: Front
- Replaces: 19256368, 24234257
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L
View related parts
Buick Regal Seal,Front Wheel Drive Intermediate Shaft
Part Number: 55573640
$16.25 MSRP: $25.90
You Save: $9.65 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft; Input Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L
View related parts
Buick Regal Seal Assembly, Front Wheel Drive Shaft Oil *Green
Part Number: 8666007
$5.53 MSRP: $9.11
You Save: $3.58 (40%)
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft; Oil Seal, Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1991 Buick Regal | 2 DOOR, 4 DOOR, CUSTOM 2 DOOR, CUSTOM 4 DOOR, LIMITED, LIMITED 2 DOOR, LIMITED 4 DOOR | 6 Cyl 3.1L, 6 Cyl 3.8L
View related parts
Buick Regal Seal,Front Wheel Drive Shaft Oil
Part Number: 24243353
$15.55 MSRP: $25.74
You Save: $10.19 (40%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft
- Position: Front
- Replaces: 24204330
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Buick Regal | CUSTOM, GL, GLX, GS, LIMITED, LS, REGAL | 6 Cyl 3.8L
View related parts
Buick Regal Seal,Front Wheel Drive Shaft Front Oil
Part Number: 93183566
$25.14 MSRP: $41.62
You Save: $16.48 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Steering Knuckle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Buick Regal | CXL TURBO 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L
View related parts
Buick Regal Seal, Front Wheel Drive Intermediate Shaft (O, Ring)
Part Number: 55588984
$4.58 MSRP: $7.57
You Save: $2.99 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft; Intermediate Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2017 Buick Regal | CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L
View related parts
Buick Regal Retainer, Front Differential Ring Gear
Part Number: 24231157
$5.54 MSRP: $9.17
You Save: $3.63 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: RETAINER, Differential Side Pinion
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2020 Buick Regal | 1SC 4 DOOR HATCHBACK, 1SL 4 DOOR HATCHBACK, 1SX 4 DOOR HATCHBACK, BASE 4 DOOR HATCHBACK, CX 4 DOOR SEDAN, CXL 4 DOOR SEDAN, CXS 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L, 6 Cyl 3.6L
View related parts
Buick Regal Seal,Front Wheel Drive Intermediate Shaft (O, Ring)
Part Number: 13358219
$1.01 MSRP: $1.62
You Save: $0.61 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: SEAL, Front Wheel Drive Axle Shaft; Intermed Shaft Seal
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick Regal | CXL 4 DOOR SEDAN, CXL TURBO 4 DOOR SEDAN | 4 Cyl 2.0L, 4 Cyl 2.4L

| Page 1 of 2 |Next >

1-20 of 25 Results

Buick Regal Wheel Seal

The Wheel Seal in Buick Regal automobiles plays the vital part of protecting the wheel bearing and hub with various unfavorable compounds including dirt, debris, and rocks. Its primary use is to seal the lubricant to avoid leakage at the same time prevent contaminants getting into the wheel bearing assembly as this would harm the bearing. Seals must be supplied with the proper lubricant to prevent overheating and to reduce the brittleness of their composition. More specifically, different forms of Wheel Seals have been used in the Buick Regal line of cars including inner and outer front and rear seals. Some of the popular brands that produce these seal include Motorcraft, Beck Arnley and Timken and they do come with high-grade material and correct fit. It is therefore necessary that one undertakes routine inspections of the wheel seal and indeed the buick regal in a bid to check for any signs of leakage or cracks.

Each OEM Buick Regal Wheel Seal we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Regal Wheel Seal Parts Questions & Experts Answers

Seal,Rear Wheel Bearing
554631
Q: How to Remove, Install and Service rear Drive Axles,Wheel Bearing and Wheel Seal on Buick Regal?
A: These cars utilize two types of drive axles, namely the C-lock and the non C-lock type whereby the difference depends on the structure of the locking system. In the C-lock type the shafts are locked by C-shaped locks that fit into slots at the inner end of the shaft while in the non C-lock type they are locked by a backing bracket plate fixed on the axle housing. The bearings used in the case of the C-lock axle comprise an outer race, bearing rollers, and roller bearing cage with snaprings while the bearings used in the case of the non C-lock axle is a unit roller bearing which is pressed on the shaft up to the shoulder. Pre-service, it is necessary to determine the axle type and the axle identification number is located on the front side of the passenger side axle tube adjacent to the differential carrier, but not for models which used 8½ in. ring gear, which have the ID on a tag under one of the differential rear cover bolts. For the non C-lock type the process starts by removing the bearing retainer plate by pounding it using chisel and the axle shaft end play check that should not be more than 0.022 in. (5mm). The removal procedures involve the detachment of the wheel, tire, and brake drum as well as the separation of the brake line, the use of the slide hammer to pull out the axle shaft and bearing assembly. The bearing retainer is then machined in several places so that it can be removed; the new bearing is then fitted and all the parts put back. For the C-lock type: The procedure is initiated by loosening and thereafter unscrewing the lockbolt and rod upon the differential; by withdrawal of the differential cover and by the unscrewing of the pinion shaft lockscrew. The axle shaft is pushed towards the center of the vehicle in order to get rid of the C-lock, always being careful not to scrap the oil seal during the extraction process. During installation, a bearing puller is applied, the new bearing is lubricated, and correct positioning of the axle shaft and C-lock must be reached in reassembling the differential and then the axle is filled with lubricant. Last of all, brake drum and wheels are reinstated and a check is made for the leaks with the help of road test.