A: To remove the steering wheel, start by parking the vehicle with the wheels pointing straight ahead and disconnecting the battery. Disable the airbag system and remove the steering column covers. Use a thin round tool to release the retainer and gently pull the airbag module towards you. Disconnect the electrical connectors and remove the airbag module. Detach the clock spring wire harness and disconnect the electrical connector for the steering wheel switches. Remove the steering wheel nut or bolt and lift the steering wheel. When installing the clock spring, make sure the wheels are straight ahead. Center the clock spring by rotating the hub clockwise until it stops, then counterclockwise until the centering window turns yellow. The rest of the installation is the reverse of removal, ensuring proper alignment of the steering wheel and tightening the nut or bolt. Finally, install the airbag module and enable the airbag system.