How do I properly inspect, measure, and refinish brake discs?

To inspect the brakes, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the brake caliper, suspending it out of the way with wire. Visually inspect the disc surface for score marks and damage, checking both sides. If pulsating has been noticed during braking, suspect disc runout. To check runout, reinstall the lug nuts and use a dial indicator to measure the reading, ensuring it does not exceed the allowable limit. If necessary, refinish the disc. It is important to not machine the disc below the specified minimum thickness, which can be checked with a micrometer. For removal, remove the caliper mounting bracket and the lug nuts if they were reinstalled. Mark the disc for reinstallation and remove the retaining screw. During installation, wire-brush the backside of the disc and clean the hub face. Apply high-temperature anti-seize and align the index marks before tightening the retaining screw. Install the caliper mounting bracket and caliper, tightening the bolts to the proper torque. Lower the vehicle, tighten the lug nuts, and depress the brake pedal to bring the pads into contact with the disc. Bleeding is only necessary if the brake hose was disconnected. Finally, carefully check the brake operation before driving the vehicle.

Genuine Buick Enclave Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Discs found

View related parts
Buick Enclave Front Brake Rotor
Part Number: 22955495
$75.47 MSRP: $149.72
You Save: $74.25 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake ; Rotor, Front And Rear Wheel Brake; Rotor
- Position: Front
- Replaces: 10390111, 25853001
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave Rear Brake Rotor Assembly
Part Number: 22768973
$80.75 MSRP: $160.21
You Save: $79.46 (50%)
ADD TO CART
Product Specifications
- Other Name: Rotor Assembly, Rear Brake ; Rotor, Front And Rear Wheel Brake; Rotor
- Position: Rear
- Replaces: 10391043, 25858784
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2017 Buick Enclave | SPORT UTILITY VEHICLE 2WD, SPORT UTILITY VEHICLE 4WD, SPORT UTILITY VEHICLE AWD | 6 Cyl 3.6L
View related parts
Buick Enclave ROTOR-FRT BRK (CTD)
Part Number: 13546862
$82.25 MSRP: $163.20
You Save: $80.95 (50%)
ADD TO CART
Product Specifications
- Other Name: Rotor
- Replaces: 13536152, 13516728, 13588515, 13526770
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave Rear Brake Rotor (Coated)
Part Number: 13516726
$89.00 MSRP: $176.58
You Save: $87.58 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor, Rr Brk (Coated); Brake Booster, Rotor
- Position: Rear
- Replaces: 13592624
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L
View related parts
Buick Enclave ROTOR-FRT BRK (CTD)
Part Number: 13546861
$91.16 MSRP: $180.86
You Save: $89.70 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor
- Replaces: 13526769, 13536149, 13516727, 13588401
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | BASE EXTENDED 4 DOOR SUV, PREMIUM 1 EXTENDED 4 DOOR SUV, PREMIUM 2 EXTENDED 4 DOOR SUV | 6 Cyl 3.6L

Buick Enclave Brake Disc

Brake Disc in Buick Enclave automobiles is a component of the disc brake where friction is created to decelerate the wheels and hence stopping the automobile. Usually, such rotors are produced of gray iron; however, they can also have ventilation fins or vanes on their structure for heat removal. That is the reason why such changes as drilled or slotted rotors can work better than analogs due to the heat-dispersing and noise-reducing properties, however they lead to the growth of pad wear. Brake Discs may wear out with use it may show signs like squealing, shaking at the brake pedal, and even scoring or grooving. The frequency of inspections should be regular because the changes in the structure of the disc, its deformation, or rust can strongly influence the braking properties. Proper machining of the Brake Rotor and the timely replacement of pad is as essential to get the premier out of the brake system of Buick Enclave.

Each OEM Buick Enclave Brake Disc we offer is competitively priced and comes with the assurance of the manufacturer's warranty for the part. Furthermore, we guarantee the speedy delivery of your orders right to your doorstep. Our hassle-free return policy is also in place for your peace of mind.

Buick Enclave Brake Disc Parts Questions & Experts Answers

Rear Brake Rotor Assembly
22768973
Q: How do I properly inspect, measure, and refinish brake discs?
A: To inspect the brakes, start by loosening the wheel lug nuts and raising the vehicle on jackstands. Remove the brake caliper, suspending it out of the way with wire. Visually inspect the disc surface for score marks and damage, checking both sides. If pulsating has been noticed during braking, suspect disc runout. To check runout, reinstall the lug nuts and use a dial indicator to measure the reading, ensuring it does not exceed the allowable limit. If necessary, refinish the disc. It is important to not machine the disc below the specified minimum thickness, which can be checked with a micrometer. For removal, remove the caliper mounting bracket and the lug nuts if they were reinstalled. Mark the disc for reinstallation and remove the retaining screw. During installation, wire-brush the backside of the disc and clean the hub face. Apply high-temperature anti-seize and align the index marks before tightening the retaining screw. Install the caliper mounting bracket and caliper, tightening the bolts to the proper torque. Lower the vehicle, tighten the lug nuts, and depress the brake pedal to bring the pads into contact with the disc. Bleeding is only necessary if the brake hose was disconnected. Finally, carefully check the brake operation before driving the vehicle.