How to Remove and Install a Backing Plate?

To remove the wheel, loosen all the lug nuts at least one full turn, before raising the car. Raise and safely support the car, then remove the wheel and tire assembly. Remove the brake drum, shoes and springs, unsecure the brake line from the wheel cylinder, then remove the wheel cylinder and the parking brake cable. Remove the hub and bearing assembly and the backing plate. To install, install the backing plate to axle, then the hub and bearing assembly and connect the parking brake cable to the backing plate. Install the wheel cylinder, as previously outlined, then the brake components. Adjust and bleed the rear brakes, adjust the parking brake cables, install the wheel and hand-tighten the lug nuts. Lower the vehicle, then tighten the lug nuts to 100 ft. lbs. (136 Nm).

Genuine Buick Century Brake Backing Plate

Brake Dust Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Brake Backing Plates found

View related parts
Buick Century Shield, Parking Brake Actuator Splash
Part Number: 25990085
Product Specifications
- Other Name: SHIELD, Parking Brake Apply; Backing Plate, Support Plate
- Replaces: 18022582
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Century | CUSTOM, CUSTOM 4 DOOR, GL, GLX, GS, LIMITED, LS, REGAL | 6 Cyl 3.1L
View related parts
Buick Century Plate Asm,Rear Brake Backing
Part Number: 18025206
Product Specifications
- Other Name: PLATE, Brake Flange/Backing; Backing Plate
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2003 Buick Century | CUSTOM, CUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, GS, LIMITED, LIMITED 4 DOOR, LS, REGAL, SPECIAL, SPECIAL 4 DOOR, SPECIAL STATION WAGON | 4 Cyl 2.2L, 6 Cyl 3.1L, 6 Cyl 3.3L
View related parts
Buick Century Shield,Parking Brake Actuator Splash
Part Number: 25990084
Product Specifications
- Other Name: SHIELD,PARK BRK ACTR SPH; Backing Plate, Support Plate
- Replaces: 18022583
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2005 Buick Century | CUSTOM, CUSTOM 4 DOOR, GL, GLX, GS, LIMITED, LS, REGAL | 6 Cyl 3.1L
View related parts
Buick Century Backing Plate Assembly, Rear Drum Brake (Rh)
Part Number: 18014505
Product Specifications
- Other Name: PLATE, Brake Flange/Backing; Backing Plate
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Buick Century | CUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, SPECIAL 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel
View related parts
Buick Century Backing Plate Assembly, Rear Drum Brake (Lh)
Part Number: 18014504
Product Specifications
- Other Name: PLATE, Brake Flange/Backing; Backing Plate
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Buick Century | CUSTOM 2 DOOR, CUSTOM 4 DOOR, CUSTOM STATION WAGON, LIMITED 2 DOOR, LIMITED 4 DOOR, SPECIAL 4 DOOR | 4 Cyl 2.5L, 6 Cyl 2.8L, 6 Cyl 3.0L, 6 Cyl 3.3L, 6 Cyl 3.8L, 6 Cyl 4.3L Diesel

Buick Century Brake Backing Plate Parts Questions & Experts Answers

Backing Plate Assembly, Rear Drum Brake (Rh)
18014505
Q: How to Remove and Install a Backing Plate?
A: To remove the wheel, loosen all the lug nuts at least one full turn, before raising the car. Raise and safely support the car, then remove the wheel and tire assembly. Remove the Brake Drum, shoes and springs, unsecure the Brake Line from the wheel cylinder, then remove the wheel cylinder and the Parking Brake Cable. Remove the hub and bearing assembly and the backing plate. To install, install the backing plate to axle, then the hub and bearing assembly and connect the parking brake cable to the backing plate. Install the wheel cylinder, as previously outlined, then the brake components. Adjust and bleed the rear brakes, adjust the parking brake cables, install the wheel and hand-tighten the lug nuts. Lower the vehicle, then tighten the lug nuts to 100 ft. lbs. (136 Nm).