Saturn 19368824 MODULE KIT,F/TNK F/PMP (W/O FUEL LVL SEN)

You can Select Your Vehicle to check if 19368824 fits your vehicle.

To remove the fuel pump module in this vehicle, start by disconnecting the cable from the negative battery terminal and relieving the fuel system pressure. Then, remove the fuel tank and disconnect the electrical and fuel supply line quick-connect fitting from the fuel pump module. Next, use a hammer and brass punch to rotate the lock ring counterclockwise and remove it. Carefully pull the fuel pump module out of the tank, angling it as necessary to protect the fuel level sensor float arm. To remove the fuel level sensor, push down on the retainer to release it, and then disengage the wiring terminals and replace the fuel level sensor. Finally, inspect the O-ring and replace it if necessary. The installation process is simply the reverse of the removal steps.

When installing the pump, you should install the gasket and bolts, ensuring they are tightened evenly to the proper torque specifications.

Remove the fuel tank and disconnect the electrical and fuel supply line quick-connect fitting from the fuel pump module.

When installing the pump, you should install the gasket and bolts, ensuring they are tightened evenly to the proper torque specifications.