Pontiac 25824167 Seal,Front Wheel Drive Intermediate Shaft (O, Ring)

You can Select Your Vehicle to check if 25824167 fits your vehicle.

To remove the wheel seal, start by raising the rear of the vehicle and supporting it securely on jackstands. Place the transaxle in Neutral and block the front wheels to prevent rolling. If working on the right rear wheel, remove the muffler assembly. Then, remove the wheel(s) carefully. Next, use a seal removal tool or a large screwdriver to pry out the wheel seal, being cautious not to damage the seal bore. For installation, use a seal installer or a large deep socket as a drift to drive the new wheel seal into the bore squarely and ensure it is completely seated. Lubricate the lip of the new seal with multi-purpose grease and then install the wheel, taking care not to damage the seal's lip. Finally, check the differential lubricant level and add more if necessary to reach the appropriate level.

Wheel leaks frequently occur due to wear of the wheel seals, which are located on the sides of the transaxle where the driveaxles are attached. If leakage of a seal is suspected, the vehicle should be raised and securely supported on jackstands.

Check the differential lubricant level and add more if necessary to bring it to the appropriate level.

Oil leaks frequently occur due to wear of the driveaxle oil seals.

If working on the right rear driveaxle, remove the muffler assembly.

If working on the right rear driveaxle, remove the muffler assembly.

Remove the driveaxle(s).

Lubricate the lip of the new seal with multi-purpose grease.