Make sure this part fits

Pontiac 14094101 Piston & Pinion Asm Divider U

1982-1986 Pontiac 6000

Customer Questions & Expert Answers (10)
GM 14094101 Piston & Pinion Asm Divider U
  • Part Description
    PISTON, Engine Piston
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Pontiac
    Manufacturer Part Number14094101
    Part DescriptionPISTON, Engine Piston
    Other NamesPiston
    Item Dimensions5.1 x 4.7 x 4.8 inches
    Item Weight1.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity6
    ManufacturerGeneral Motors
    SKU14094101
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1986 Pontiac 60006 Cyl 2.8L2 DOOR, 4 DOOR, LE 2 DOOR, LE 4 DOOR, LE STATION WAGON, SE 4 DOOR, SE STATION WAGON, STATION WAGON, STE 2 DOOR, STE 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 14094101 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should I prepare for piston removal for the 1977 Buick Century? Posted by Customer
    A:
    To prepare for piston removal, mark and match each connecting rod cap to its respective connecting rod. Place rubber hose over connecting rod studs to protect the crankshaft and cylinders.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be examined in the ring grooves for the 1981 Buick Skylark? Posted by Customer
    A:
    Examine the ring grooves for nicks that could cause the rings to hang up.
    Posted by GMPartsGiant Specialist
    Q:
    How do you measure the ring end gap for the 1982 Buick Skylark? Posted by Customer
    A:
    Insert a top ring into the cylinder bore about 1/4-inch below the upper limit of ring travel, ensuring it is square with the cylinder wall using a piston. Measure the gap between the ends of the ring with a feeler gauge.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How should the connecting rods and caps be handled for the 1983 Buick Skylark? Posted by Customer
    A:
    Inspect the connecting rods and caps for cylinder identification, marking them with a small punch if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    What is the procedure for using a piston ring compressor for the 1981 Buick Skylark? Posted by Customer
    A:
    A piston ring compressor should be placed around the piston, ensuring the base is flush with the cylinder block, and tightened until the rings are flush with the piston surface before pushing the piston assembly into the bore.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done if the ring end gap is insufficient for the 1987 Oldsmobile Cutlass? Posted by Customer
    A:
    If the gap is insufficient, replace the ring with another top ring and check all top rings similarly, using a fine file to adjust if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done with the piston/connecting rod assembly after it is pushed out for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    Push the piston/connecting rod assembly out through the top of the cylinder and place it next to its rod cap on the sequenced work area.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be inspected in the ring grooves for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    The ring grooves should be inspected for nicks that could cause the rings to hang up.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after the piston is pushed into place for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    Ensure that all bearing surfaces and the crankshaft journal are coated with engine oil, then remove the tubing protector pieces and install the connecting rod bearing cap (with bearing) to the connecting rod.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 14094101, the Right Choice

To ensure reliability, purchase GM part # 14094101 Piston & Pinion Asm Divider U. It is sometimes referred to as Pontiac Piston. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Pontiac 6000 models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 14094101 Piston & Pinion Asm Divider U. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Pontiac parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly