Pontiac 25857595 Manual Transmission Selector & Shift Lever Cable Assembly

You can Select Your Vehicle to check if 25857595 fits your vehicle.

Lift up the cable-retaining clips at the front of the shifter assembly.

To remove the shift cable, first disconnect it at the transaxle and test the shifter to see if it moves smoothly without the cable. If adjustment is needed, follow these steps: 1. Raise the front of the vehicle and secure it on jackstands. 2. Remove the nut securing the cable near the exhaust manifold. 3. Lower the vehicle. 4. Remove the center console and push aside the driver's side carpet for access to the cable grommet. 5. Pry the shift cable end from the shift lever pin using a flat-blade screwdriver. 6. Pry the U-shaped shift cable retaining clip away from the cable. 7. Place a blanket over the driver's fender. 8. Locate the shift lever in the engine compartment and disconnect the cable end from it. 9. Squeeze the clip on the shift cable and pull it up from its bracket. 10. Pry the large rubber cable grommet from the firewall. 11. Carefully remove the shift cable by pulling it through the hole in the firewall from the engine compartment side.

To remove the shift cable, first disconnect it at the transaxle and test the shifter to see if it moves smoothly without the cable.