Oldsmobile 7844609 Switch,Dimmer & 2, Speed Wiper

You can Select Your Vehicle to check if 7844609 fits your vehicle.

Detach the cable from the negative battery terminal. Remove the trim panel or instrument cluster bezel and detach the electrical connector. Remove the screws and lift the switch housing out of the trim panel or cluster bezel. Use a small screwdriver to release the clips and withdraw the switch from the opening. Place the switch in position, then press in until the clips engage. Install the trim panel or instrument cluster bezel.

Start by disconnecting the cable from the negative battery terminal to remove and replace a switch in a vehicle. The next step is removing either the trim panel or instrument cluster bezel, then disconnecting the electrical connector. Thereafter, unscrew it and lift up the switch housing from the trim panel or cluster bezels. A small screwdriver can be used to unlock the clips; otherwise bring out the screwdrivers if they are there. This done, transfer to put new switch on its place and press it until clips lock into position alternatively fix any screws if required instead of that. Finally, re-install the trim panel or instrument cluster bezel.