Oldsmobile 12382578 Plate Kit,Clutch Pressure & Driven (W/ Cover)

You can Select Your Vehicle to check if 12382578 fits your vehicle.

To remove the clutch components, the transmission needs to be removed, unless the engine is being taken out for a major overhaul. It is recommended to replace the clutch components whenever the engine or transmission is removed unless they are new or in near-perfect condition. The process involves disconnecting the clutch hydraulic fluid line, supporting the engine while removing the transmission, and inspecting the flywheel and pressure plate for indexing marks. The components need to be checked, and the clutch disc and release bearing should be replaced. The pressure plate-to-flywheel bolts should be tightened gradually in a crisscross pattern, and the clutch disc should be centered using the alignment tool. The release bearing, transmission, and all previously removed components should be installed, and all fasteners should be tightened.

The bellhousing may need gentle prying to detach it from alignment dowels.

The flywheel and pressure plate should be carefully inspected for indexing marks or scribed marks for proper alignment.