Make sure this part fits

Oldsmobile 12575061 Cylinder Head Assembly

1996-1999 Oldsmobile

Customer Questions & Expert Answers (7)
GM 12575061 Cylinder Head Assembly
  • Part Description
    Head Asm,Cyl ; Head, Engine Cylinder
  • Replaces
    24503767
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number12575061
    Part DescriptionHead Asm,Cyl ; Head, Engine Cylinder
    Other NamesCylinder Head
    Item Dimensions17.3 x 8.7 x 8.8 inches
    Item Weight14.40 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces24503767
    Require Quantity2
    ManufacturerGeneral Motors
    SKU12575061
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1997-1998 Oldsmobile Achieva6 Cyl 3.1L2 DOOR, 4 DOOR, SC 2 DOOR, SEDAN LEVEL I, SEDAN LEVEL II, SL 4 DOOR
    1996-1999 Oldsmobile Cutlass6 Cyl 3.1L2 DOOR, 4 DOOR, SC 2 DOOR, SEDAN LEVEL I, SEDAN LEVEL II, SL 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12575061 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step in cylinder head disassembly, and what must be removed before starting this procedure for the 1988 Chevrolet Beretta? Posted by Customer
    A:
    The first step in cylinder head disassembly is the removal of the intake and exhaust valves and related components. For a Quad-4 engine, the camshafts and housings must be removed before beginning the cylinder head disassembly procedure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be checked prior to cylinder head removal on the 1994 Chevrolet Beretta with high mileage or during an engine overhaul? Posted by Customer
    A:
    Camshaft lobe height.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be measured in each valve for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    The margin width on each valve should be measured.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What should be done before installing the new cylinder head for the 1994 Chevrolet Beretta? Posted by Customer
    A:
    Before installing the new cylinder head, the mating surfaces should be cleaned and any old material should be removed using a gasket scraper. Additionally, the threads in the head bolt holes should be checked for damage and chased.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What lubrication should be applied to the valve stems, and how should you install the valves and valve springs during reassembly for the 1988 Chevrolet Beretta? Posted by Customer
    A:
    Apply moly-base grease or clean engine oil to the valve stem. To install the valves and valve springs during reassembly, position the valve springs (and shims, if used) over the valves. Compress the springs with a valve spring compressor and carefully install the keepers in the groove. Slowly release the compressor, ensuring the keepers seat properly. Apply a small dab of grease to each keeper if necessary. Repeat this procedure for the remaining valves.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    Q:
    What are the final steps after tightening the head bolts to their final torque for the 1995 Chevrolet Beretta? Posted by Customer
    A:
    Complete the remaining installation steps in reverse, refill the cooling system, change the oil and filter, and run the engine to check for leaks and proper operation.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Cylinder Head
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12575061, the Right Choice

To ensure reliability, purchase GM part # 12575061 Cylinder Head Assembly. It is sometimes referred to as Oldsmobile Cylinder Head. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Achieva, Cutlass models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 12575061 Cylinder Head Assembly. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly