Make sure this part fits

Oldsmobile 22500808 Flywheel

1982-1985 Oldsmobile

Customer Questions & Expert Answers (16)
GM 22500808 Flywheel
  • Part Description
    Flywheel
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number22500808
    Part DescriptionFlywheel
    Other NamesDrive Plate
    Item Dimensions14.5 x 13.9 x 0.3 inches
    Item Weight6.60 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU22500808
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1982-1984 Oldsmobile 988 Cyl 5.7L DieselREGENCY 2 DOOR, REGENCY 4 DOOR, REGENCY BROUGHAM
    1982-1985 Oldsmobile Custom Cruiser8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON
    1982-1983 Oldsmobile Cutlass8 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, CUTLASS CALAIS, CUTLASS CRUISER
    1982-1985 Oldsmobile Delta 888 Cyl 5.7L Diesel2 DOOR, 4 DOOR, BROUGHAM 2 DOOR, BROUGHAM 4 DOOR, BROUGHAM LS 4 DOOR, RWD, STATION WAGON
    1982-1985 Oldsmobile Toronado8 Cyl 5.7L DieselBROUGHAM
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 22500808 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the automatic transmission for the 1985 Buick Regal? Posted by Customer
    A:
    Detach the transmission and remove the six bolts attaching the flywheel to the crankshaft flange.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    How should the flywheel be positioned for automatic transmissions for the 1983 Chevrolet Caprice? Posted by Customer
    A:
    In the case of automatic transmissions, position the flywheel with the torque converter attaching pads facing the transmission.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What type of engines does this procedure apply to for the 1983 Chevrolet Caprice? Posted by Customer
    A:
    This procedure applies only to 231 cu in V6 engines.
    Posted by GMPartsGiant Specialist
    Q:
    What is the next step after preparing the flex plate and crankshaft flange for the 1978 Chevrolet Caprice? Posted by Customer
    A:
    Install the flex plate and torque-tighten the bolts according to the specified requirements.
    Posted by GMPartsGiant Specialist
    Q:
    How should the bolts be secured during reinstallation for the 1980 Chevrolet Caprice? Posted by Customer
    A:
    Torque the bolts according to the specified requirements.
    Posted by GMPartsGiant Specialist
    Q:
    What should be checked on the clutch friction face for manual transmission versions for the 1982 Chevrolet Caprice? Posted by Customer
    A:
    Check for scoring on the clutch friction face. Light scoring may be dressed out using emery cloth, but deep scoring necessitates replacing the flywheel to prevent clutch damage.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after removing the flywheel for the 1986 Chevrolet El Camino? Posted by Customer
    A:
    Inspect the flex plate for cracks and replace it if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    What action should be taken if the starter ring gear is worn or the mounting bolt holes are elongated for the 1987 Chevrolet El Camino? Posted by Customer
    A:
    Replace the driveplate completely if the starter ring gear is worn or the mounting bolt holes are elongated.
    Posted by GMPartsGiant Specialist
    Q:
    How should the flywheel be installed for automatic transmissions for the 1982 Chevrolet El Camino? Posted by Customer
    A:
    For automatic transmissions, the flywheel must be installed with the torque converter attaching pads facing the transmission.
    Posted by GMPartsGiant Specialist
    Q:
    What is the final step when reinstalling the flywheel for the 1984 Chevrolet El Camino? Posted by Customer
    A:
    Torque the bolts to the specified settings.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    Q:
    What should be done if the vibration increases after installing the clip for the 1987 Chevrolet El Camino? Posted by Customer
    A:
    If the vibration increases, remove the clip and relocate it 180 degrees from its original location.
    Posted by GMPartsGiant Specialist
    Q:
    How can you check the flex plate run-out for the 1995 Oldsmobile Cutlass? Posted by Customer
    A:
    Mount a dial indicator on the engine block and measure at 3 attaching bosses, ensuring that crankshaft end play is held in one direction.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done after removing the transmission and clutch for the 1993 Oldsmobile Cutlass? Posted by Customer
    A:
    Take out the bolts securing the flywheel to the crankshaft flange and remove the flywheel.
    Posted by GMPartsGiant Specialist
    Q:
    What should be examined on the starter ring gear for the 1982 Oldsmobile Cutlass? Posted by Customer
    A:
    Examine the starter ring gear for broken or chipped teeth. If any are evident, the flywheel must be replaced with a new one.
    Posted by GMPartsGiant Specialist
    Q:
    How should the flywheel be positioned for automatic transmissions for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    In the case of automatic transmissions, position the flywheel with the torque converter attaching pads facing the transmission.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Flywheel
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 22500808, the Right Choice

To ensure reliability, purchase GM part # 22500808 Flywheel. It is sometimes referred to as Oldsmobile Flywheel. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile 98, Custom Cruiser, Cutlass models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 22500808 Flywheel. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly