Make sure this part fits

Oldsmobile 24504390 Bracket Assembly, Engine Mount Strut

1996-2004 Oldsmobile

Customer Questions & Expert Answers (8)
GM 24504390 Bracket Assembly, Engine Mount Strut
  • Part Description
    BRACKET, A/C Compressor Mounting
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number24504390
    Part DescriptionBRACKET, A/C Compressor Mounting
    Item Dimensions4.4 x 4.3 x 12.6 inches
    Item Weight5.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24504390
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1996-1997 Oldsmobile Cutlass6 Cyl 3.1L2 DOOR, 4 DOOR
    1996-2004 Oldsmobile Silhouette6 Cyl 3.4L2/SLIDING DOORS, AWD EXT 2/SLIDING DOORS, EXT, EXT 2/SLIDING DOORS, MPV, SILHOUETTE
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24504390 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What is the procedure for inspecting the rear mount? Posted by Customer
    A:
    To inspect the rear mount, elevate the vehicle and push up and down on the transmission tailshaft while observing the mount. If the rubber separates from the metal plate or the tailshaft moves excessively, replace the mount. If there is movement between the mount's metal plate and the attachment point, tighten the bolts or screws.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    Q:
    What makes the right rear engine mount replacement more complex for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    The right rear engine mount replacement is more complex because it requires the removal of the hood and the use of a three-bar engine support from above, along with raising and supporting the front of the vehicle on jack stands. Additionally, the engine cooling fan must be removed, the engine torque strut disconnected, the right drive axle removed, and the right ball joint disconnected at the control arm.
    Posted by GMPartsGiant Specialist
    Q:
    What is the procedure for replacing the rear mount for the 1985 Oldsmobile Cutlass? Posted by Customer
    A:
    Remove the bolts that go through the mount and into the transmission, then raise the transmission slightly using a jack. Remove the mount along with any shims, spacers, or brackets, and install the new mount. Lower the transmission and align the bolts before tightening all bolts to the specified torque.
    Posted by GMPartsGiant Specialist
    Q:
    Do engine mounts require regular attention for the 1992 Pontiac Grand Prix? Posted by Customer
    A:
    Engine mounts seldom require attention, but broken or deteriorated mounts should be replaced immediately to prevent damage or wear on driveline components.
    Posted by GMPartsGiant Specialist
    Q:
    How can I slow the deterioration of engine mounts for the 1991 Pontiac Grand Prix? Posted by Customer
    A:
    To slow deterioration, apply rubber preservative to the mounts.
    Posted by GMPartsGiant Specialist
    Q:
    What should be inspected on the engine mounts for the 1999 Pontiac Grand Prix? Posted by Customer
    A:
    Check the mounts for cracked, hardened, or separated rubber, and look for any relative movement between the mount plates and the engine or frame, using a large screwdriver or pry bar to test for movement.
    Posted by GMPartsGiant Specialist
    Q:
    How do I install the new engine mounts for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    Installation follows the reverse order of removal, using thread locking compound on the threads and tightening everything securely.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Engine Mount
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24504390, the Right Choice

To ensure reliability, purchase GM part # 24504390 Bracket Assembly, Engine Mount Strut. It is sometimes referred to as Oldsmobile Engine Mount, Oldsmobile Engine Torque Strut Mount. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Cutlass, Silhouette models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24504390 Bracket Assembly, Engine Mount Strut. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly