Make sure this part fits

Oldsmobile 24575562 Balancer Assembly, Crankshaft

1987-2001 Oldsmobile

Customer Questions & Expert Answers (8)
GM 24575562 Balancer Assembly, Crankshaft
  • Part Description
    BALANCER, Engine Crankshaft And Camshaft Balancer
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number24575562
    Part DescriptionBALANCER, Engine Crankshaft And Camshaft Balancer
    Item Dimensions9.4 x 8.5 x 4.1 inches
    Item Weight4.20 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24575562
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1992-1998 Oldsmobile Achieva4 Cyl 2.3L, 4 Cyl 2.4L2 DOOR, 4 DOOR, S 2 DOOR, S 4 DOOR, SC 2 DOOR, SEDAN LEVEL I, SEDAN LEVEL II, SL 2 DOOR, SL 4 DOOR
    1999-2001 Oldsmobile Alero4 Cyl 2.4L2 DOOR, 4 DOOR, GL COUPE 2 DOOR, GL SEDAN 4 DOOR, GX 2 DOOR, GX SEDAN 4 DOOR
    1987-1991 Oldsmobile Calais4 Cyl 2.3L2 DOOR, 4 DOOR, INTERNATIONAL 2 DOOR, INTERNATIONAL 4 DOOR, S 2 DOOR, S 4 DOOR, SL 2 DOOR, SL 4 DOOR, SUPREME 2 DOOR, SUPREME 4 DOOR
    1990-1991 Oldsmobile Cutlass4 Cyl 2.3L2 DOOR, 4 DOOR
  • Customer Questions & Expert Answers

    Q:
    I would like to confirm if this is the correct part number for my vehicle. Please advise. Thank you. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 24575562 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    What precaution should be taken for 1992 Chevrolet Beretta equipped? Posted by Customer
    A:
    Make sure the lockout feature is turned off before disconnecting the battery.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should you position the damper on the crankshaft during installation for the 1990 Chevrolet Beretta? Posted by Customer
    A:
    Position the damper on the crankshaft and slide it through the seal until it bottoms against the crankshaft sprocket. Ensure that the slot (keyway) in the hub is aligned with the Woodruff key in the end of the crankshaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    How should the torsional damper be removed from the crankshaft for the 1985 Oldsmobile Cutlass? Posted by Customer
    A:
    Install a special torsional damper remover to the damper and carefully draw it off the crankshaft, ensuring not to drop it as it breaks free. A common gear puller should not be used as it may separate the outer portion of the damper from the inner hub; only a puller that bolts to the inner hub should be utilized.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    Q:
    What should be done for the manual transaxle 1992 Pontiac Grand Prix? Posted by Customer
    A:
    For manual transaxle models, engage high gear and apply the brakes as an assistant removes the damper bolt, using a large breaker bar and a six-point socket if necessary.
    Posted by GMPartsGiant Specialist
    Q:
    How should the damper be removed from the crankshaft for the 1996 Pontiac Grand Prix? Posted by Customer
    A:
    The damper should pull off the crankshaft by hand, leaving the Woodruff key in place; however, on 1997 and later models, a special crankshaft pulley puller may be needed.
    Posted by GMPartsGiant Specialist
    Q:
    What is the first step to take before starting the work for the 1996 Pontiac Grand Prix? Posted by Customer
    A:
    Begin by disconnecting the negative battery cable, ensuring that the Theftlock audio system's lockout feature is off if applicable.
    Posted by GMPartsGiant Specialist
    Q:
    Why is it important for the housing without dowel pins to make even contact with the engine block surface for the 1994 Pontiac Grand Prix? Posted by Customer
    A:
    It is important because if it loses contact, the gears will not engage properly, leading to potential defects.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Harmonic Balancer
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 24575562, the Right Choice

To ensure reliability, purchase GM part # 24575562 Balancer Assembly, Crankshaft. It is sometimes referred to as Oldsmobile Harmonic Balancer. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Achieva, Alero, Cutlass models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 24575562 Balancer Assembly, Crankshaft. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly