Make sure this part fits

Oldsmobile 10054525 Arm Kit,Valve Rocker

1987-1993 Oldsmobile

Customer Questions & Expert Answers (10)
GM 10054525 Arm Kit,Valve Rocker
  • Part Description
    Arm Kit,Valve Rocker
  • Manufacturer
    General Motors
Make sure this part fits
$13.05 MSRP: $14.84
You Save: $1.79 (13%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Oldsmobile
    Manufacturer Part Number10054525
    Part DescriptionArm Kit,Valve Rocker
    Other NamesRocker Arm
    Item Dimensions3.2 x 2.2 x 2.1 inches
    Item Weight0.50 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Require Quantity12
    ManufacturerGeneral Motors
    SKU10054525
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    1987-1993 Oldsmobile Cutlass6 Cyl 2.8L, 6 Cyl 3.1L2 DOOR, 4 DOOR, BROUGHAM 4 DOOR, BROUGHAM SL 2 DOOR, BROUGHAM STATION WAGON, INTERNAL 2 DOOR, INTERNAL 4 DOOR, SL 2 DOOR, SL 4 DOOR, SL STATION WAGON, STATION WAGON
    1987 Oldsmobile Firenza6 Cyl 2.8L2 DOOR NOTCHBACK, 2 DOOR PLAIN BACK HATCHBACK, 4 DOOR, BROUGHAM 2 DOOR NOTCHBACK, BROUGHAM 2 DOOR PLAIN BACK, BROUGHAM 4 DOOR, STATION WAGON
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 10054525 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How can the rocker arms be removed from the shaft for the 1982 Buick Century? Posted by Customer
    A:
    The rocker arms can be removed from the shaft by removing the nylon arm retainers.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What is the final step in installing the rocker arms on the 1977 Buick Century? Posted by Customer
    A:
    The final step is to tighten the retaining bolts to 25 ft. lbs. (32 Nm) and reinstall the valve covers with new gaskets.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should you ensure about the hole at the pushrod end of each rocker arm for the 1992 Chevrolet Beretta? Posted by Customer
    A:
    Ensure the hole at the pushrod end of each rocker arm is open.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should be applied to the pivot balls before engine oil pressure builds up for the 1992 Chevrolet Beretta? Posted by Customer
    A:
    Moly-base grease.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    How should each rocker be positioned on the shaft for the 1992 Oldsmobile Cutlass? Posted by Customer
    A:
    Center each rocker on the One-quarterin hole in the shaft.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should be examined on the pivot area of each rocker arm for the 1989 Pontiac Grand Prix? Posted by Customer
    A:
    Examine the pivot area for wear and damage; replace any worn or damaged rocker arms and pivot balls.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Rocker Arm
    Q:
    What should you do if the pushrod guides need to be taken out for the 1997 Pontiac Grand Prix? Posted by Customer
    A:
    Mark the pushrod guides for proper reinstallation.
    Posted by GMPartsGiant Specialist
    Q:
    How can you check for excessive wear or bending in the pushrods for the 1998 Pontiac Grand Prix? Posted by Customer
    A:
    Ensure the pushrod ends are free of excessive wear and check for bending by rolling them on a flat surface.
    Posted by GMPartsGiant Specialist
    Q:
    What steps should be taken if all rocker arms are removed for the 1989 Pontiac Grand Prix? Posted by Customer
    A:
    If all rocker arms are removed, take out the pushrod guide plate beneath them. Remove the pushrods and store them separately to avoid mix-ups during installation, using a perforated cardboard box if multiple pushrods are involved, and label the front of the engine.
    Posted by GMPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 10054525, the Right Choice

To ensure reliability, purchase GM part # 10054525 Arm Kit,Valve Rocker. It is sometimes referred to as Oldsmobile Rocker Arm. Directly from GM, genuine parts are superb with regards to quality, longevity, and fit. Every single part passed stringent quality testing, so you can be sure that it's safe, durable, and built to perform like your original parts. This part fits specific Oldsmobile Cutlass, Firenza models.

GMPartsGiant.com is a leading supplier of genuine GM parts and accessories such as GM 10054525 Arm Kit,Valve Rocker. You're certainly in the right place if you're searching for the great cost-effective OEM GM parts. Look no further than our vast inventory of genuine GM parts offered at unbeatable online prices, all of which are backed by the manufacturer's warranty. Not to forget, our hassle-free return policy and quick delivery service ensure a smooth shopping experience for you. For detailed Oldsmobile parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly