Make sure this part fits

Hummer 19178597 Piston,(W/Pinion)

2008-2009 Hummer H2

Customer Questions & Expert Answers (7)
GM 19178597 Piston,(W/Pinion)
  • Part Description
    PISTON, Engine Piston
  • Manufacturer
    General Motors
Make sure this part fits
$37.12 MSRP: $64.60
You Save: $27.48 (43%)
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Hummer
    Manufacturer Part Number19178597
    Part DescriptionPISTON, Engine Piston
    Other NamesPiston
    Item Dimensions4.7 x 4.6 x 4.5 inches
    Item Weight1.80 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU19178597
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008-2009 Hummer H28 Cyl 6.2L, 8 Cyl 6.2L FlexPICKUP, SUV
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 19178597 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How should connecting rods and caps be handled during disassembly for the 2009 Chevrolet Avalanche? Posted by Customer
    A:
    Connecting rods and caps should be carefully identified and labeled for proper reassembly. The connecting rod cap fasteners should be removed, and then the connecting rod/piston assembly can be pushed out of the engine after removing the bearing insert. It is recommended to store the removed heads on blocks of wood for protection.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done after installing all piston/connecting rod assemblies for the 2011 Chevrolet Silverado? Posted by Customer
    A:
    After installing all piston/connecting rod assemblies, you should rotate the crankshaft by hand to check for any binding. It is also important to check the connecting rod endplay for correctness. If necessary, the rods may need to be taken for resizing if new components were installed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How should connecting rods and caps be handled during disassembly for the 2009 Chevrolet Tahoe? Posted by Customer
    A:
    Connecting rods and caps should be carefully identified and labeled for proper reassembly. The connecting rod cap fasteners should be removed, and then the connecting rod/piston assembly can be pushed out of the engine after removing the bearing insert. It is recommended to store the removed heads on blocks of wood for protection.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How should connecting rods and caps be handled during disassembly for the 2011 Chevrolet Suburban? Posted by Customer
    A:
    Connecting rods and caps should be carefully identified and labeled for proper reassembly. The connecting rod cap fasteners should be removed, and then the connecting rod/piston assembly can be pushed out of the engine after removing the bearing insert. It is recommended to store the removed heads on blocks of wood for protection.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    What should be done during the installation of piston/connecting rod assemblies for the 2011 GMC Sierra? Posted by Customer
    A:
    When installing piston/connecting rod assemblies, you should ensure that the cylinder walls are clean and apply engine oil. Carefully guide each assembly into the cylinder while paying attention to proper orientation. It is also important to verify the connecting rod bearing oil clearance using Plastigage and ensure it falls within specifications. Before the final installation of rod caps and bolts, grease or assembly lube should be applied to the bearing faces.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    Q:
    How should connecting rods and caps be handled during disassembly for the 2009 GMC Yukon? Posted by Customer
    A:
    Connecting rods and caps should be carefully identified and labeled for proper reassembly. The connecting rod cap fasteners should be removed, and then the connecting rod/piston assembly can be pushed out of the engine after removing the bearing insert. It is recommended to store the removed heads on blocks of wood for protection.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Piston
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 19178597, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 19178597 Piston,(W/Pinion). It is sometimes referred to as Hummer Piston. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Hummer H2 models.

Affordable, reliable and built to last, GM part # 19178597 Piston,(W/Pinion) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Hummer parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly