Hummer 15319477 Fuse, *Pink

You can Select Your Vehicle to check if 15319477 fits your vehicle.

The vehicle's electrical circuits are protected by fuses, circuit breakers, and fusible links. The main fuse/relay panel is in the engine compartment, while the rear fuse/relay panel is under the left rear seat. Each fuse protects a specific circuit, and the panel identifies the circuits. There are small, medium, and large fuses with the same blade terminal design. Medium and large fuses can be removed by hand, while small fuses require pliers or a fuse-puller tool. Check the fuse first if an electrical component fails, using a test light to check for power. If power is present on one side of the fuse but not the other, the fuse is blown. Blown fuses can also be visually inspected. Replace blown fuses with the correct type and rating. Fusible links are used in unfused circuits like the alternator circuit. The fusible link for the alternator circuit is in the wire from the battery to the alternator and is easily identifiable. Fusible links cannot be repaired, but a new link of the same size wire can be installed by cutting out the damaged link, stripping the insulation, twisting and soldering the wires together, and using electrical tape to cover the joint. Connect the negative battery cable and test the circuit for proper operation.

Fuses of different ratings are physically interchangeable, but it is recommended to only use fuses of the proper rating.

The electrical circuits of a vehicle are protected by a combination of fuses, circuit breakers, and fusible links. These protective devices are located in the fuse-relay panel in the engine compartment.

To replace a fusible link, the negative battery cable must be disconnected, and the damaged link can be cut out of the wire behind the connector.

The fuse panel itself identifies the various circuits.

There are different sizes of fuses, including small, medium, and large, all with the same blade terminal design. The medium and large fuses can be removed by hand, but the small fuses require pliers or a fuse-puller tool.

The electrical circuits in a vehicle are safeguarded by a combination of fuses, circuit breakers, and fusible links.

If a fuse is blown, replace it with the correct type. Fuses of different ratings are physically interchangeable, but only fuses of the proper rating should be used.