Make sure this part fits

Hummer 12679524 Throttle Body Assembly (W/ Throttle Actuator)

2008 Hummer

Customer Questions & Expert Answers (17)
GM 12679524 Throttle Body Assembly (W/ Throttle Actuator)
  • Part Description
    Body Assembly, Throttle (W/ Throttle Actuator)
  • Replaces
    12572658, 12580760
  • Manufacturer
    General Motors
Make sure this part fits
$251.92 MSRP: $523.10
You Save: $271.18 (52%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine Hummer
    Manufacturer Part Number12679524
    Part DescriptionBody Assembly, Throttle (W/ Throttle Actuator)
    Other NamesThrottle Body
    Item Dimensions10.7 x 6.9 x 5.4 inches
    Item Weight2.70 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12572658, 12580760
    ManufacturerGeneral Motors
    SKU12679524
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California’s Proposition 65
  • Vehicle Fitment

    Year Make Model Engine Important vehicle option details
    2008 Hummer H28 Cyl 6.2LPICKUP, SUV
    2008 Hummer H38 Cyl 5.3LSUV
  • Customer Questions & Expert Answers

    Q:
    I am wonder if this is complete and correct part for my vehicle. Posted by GMPartsGiant Specialist
    A:
    You can Select Your Vehicle to check if 12679524 fits your vehicle.
    Posted by GMPartsGiant Specialist
    Q:
    How to inspect and clean a throttle body on Chevrolet Avalanche,Silverado,Suburban,Tahoe,GMC Sierra,Yukon,Yukon Denali and Yukon XL? Posted by Customer
    A:
    Remove the air intake duct and inspect the throttle body for carbon build-up. If dirty, clean with a sensor-safe solvent. Disconnect the throttle body's electrical connector, remove its mounting fasteners, and discard the old gasket. Install in reverse order, using a new gasket and tightening to torque specifications. Start the engine to check the throttle body's operation and ensure no air leaks.
    Posted by GMPartsGiant Specialist
    Q:
    How do you remove the throttle body for Chevrolet Trailblazer? Posted by Customer
    A:
    To remove the throttle body on V6 models, start by removing the air intake duct and resonator and disconnecting the electrical connector and the EVAP canister purge line. Then, remove the mounting bolts along with the throttle body. Make sure to remove any old gasket material from the throttle body and intake manifold and install a new gasket.
    Posted by GMPartsGiant Specialist
    Q:
    What should be done with the old gasket for the 2010 Chevrolet Avalanche? Posted by Customer
    A:
    Discard the old gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should you do after removing the engine cover of the 1996 Chevrolet Express? Posted by Customer
    A:
    Disconnect the electrical connector from the fuel meter body.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done after disconnecting the battery cable of the 1996 Chevrolet Express? Posted by Customer
    A:
    After disconnecting the battery cable, the engine cover and the air intake duct should be removed.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done before removing the upper intake manifold for the 2011 Chevrolet Silverado? Posted by Customer
    A:
    Disconnect the negative battery cable and relieve fuel system pressure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done with the old gasket for the 2012 Chevrolet Tahoe? Posted by Customer
    A:
    Discard the old gasket.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done during installation for the 2007 Chevrolet Suburban? Posted by Customer
    A:
    Use new gaskets and o-rings where necessary and tighten fasteners to proper torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should I do when installing the new throttle body for the 2010 Chevrolet Silverado? Posted by Customer
    A:
    Use a new gasket and tighten the mounting fasteners to the torque specifications.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What electrical connectors should be disconnected of the 2009 GMC Sierra? Posted by Customer
    A:
    Disconnect various electrical connectors, including those for the EVAP canister purge solenoid and MAP sensor.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should be done before removing the upper intake manifold for the 2012 GMC Yukon? Posted by Customer
    A:
    Disconnect the negative battery cable and relieve fuel system pressure.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should I do if I find the throttle body dirty for the 2011 GMC Sierra? Posted by Customer
    A:
    Clean it with solvent or carburetor cleaner that is safe for oxygen sensor systems and catalytic converters.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    What should I do after installing the new throttle body for the 2011 GMC Yukon? Posted by Customer
    A:
    Start the engine and verify that the throttle body operates correctly and that there are no air leaks.
    Posted by GMPartsGiant Specialist
    See expert answers on similar Throttle Body
    Q:
    Does this throttle body assembly need to be programmed? Posted by Customer
    A:
    No, there is no programming needed. The TBS will automatically learn while running the car
    Posted by GMPartsGiant Specialist 27/2/2021
    Q:
    Does this throttle body assembly come with the senor? Posted by Customer
    A:
    Yes, it comes with the throttle actuator
    Posted by GMPartsGiant Specialist 27/2/2021
    Q:
    Is this considered an analog or digital throttle body? Posted by Customer
    A:
    This is an analaog style throttle body
    Posted by GMPartsGiant Specialist 27/2/2021
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

Genuine GM Part 12679524, the Right Choice

Your vehicle deserves only genuine OEM GM parts and accessories. To ensure reliability, purchase GM part # 12679524 Throttle Body Assembly (W/ Throttle Actuator). It is sometimes referred to as Hummer Throttle Body. Our GM parts and accessories are expedited directly from authorized GM dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM GM parts are the best for restoring your vehicle to factory condition performance. This part fits specific Hummer H2, H3 models.

Affordable, reliable and built to last, GM part # 12679524 Throttle Body Assembly (W/ Throttle Actuator) stands out as the smart option. GMPartsGiant.com is your prime online source with the biggest and best selection of genuine GM parts and accessories at giant discounted prices. We have the OEM GM parts and accessories you need at the wholesale prices. GMPartsGiant.com has you covered no matter what type of GM vehicle you drive. For detailed Hummer parts information, click here.

Why choose GM Parts Giant

  • Dedicated Service

    Your complete satisfaction is our #1 goal

  • Lowest Prices

    Best deals on genuine OE parts from dealerships

  • Fast Delivery

    Orders are processed and delivered promptly